MakerBot ABS-R

Real, production- grade ABS for manufacturing applications

ABS is one of the most popular materials for injection molded consumer products due to its clean surface finish, durability, and heat resistance. METHOD X can print manufacturing-grade ABS without warping and without weakening additives thanks to its 100°C heated chamber.

BUY

Colors Available:

ABS, FINALLY AS EASY AS PLA

With our proprietary RapidRinse™ support achieve incomparable ABS parts with unprecedented ease.

TAP WATER SOLUBLE

Forget the cumbersome wash tanks and chemicals, RapidRinse™ dissolves in pure tap water so it’s easy to use in just about any environment.

DISSOLVES IN MINUTES*

You don’t have time to wait around while your print dissolves, so we’ve engineered RapidRinse™ to dissolve faster than PVA and competitive high-temp dissolvable support materials.

*Dissolution time may vary based on part geometry and dissolution methodology

PRINTER COMPATIBILITY

EXTRUDER COMPATIBILITY

SUPPORT MATERIAL

- MakerBot RapidRinse

DIMMENSIONAL ACCURACY

- Finished part dimensional accuracy of ± 0.2mm (± 0.007in)¹

TECH SPECS	Imperial	Metric
Heat Deflection (ASTM 648, 66 psi)	183°F	84°C
Flexural Modulus (ASTM D790, 15 mm/min)	11,200 psi	77 MPa
Tensile Strength at yield (Type 1, 0.125", 0.2"/min)	6,236 psi	43 MPa
Tensile Modulus (ASTM D638, 50 mm/min)	348,000 psi	2,400 MPa
Strain at Yield - Elongation (%)	>2.6%	>2.6%
Notched Impact Strength (ASTM D256)	0.48 ft-lb/in	26 J/m

MakerBot ABS Applications

END-USE PARTS

Get dimensionally-accurate, production-grade, real ABS end-use parts at a fraction of traditional manufacturing costs. METHOD reduces costs and saves time for small production manufacturing runs.

MANUFACTURING TOOLS

Prototype with production-grade ABS to achieve part properties close to injection molded parts. Print dimensionally accurate assemblies and validate your designs to get your products to market faster—all at a fraction of industrial 3D printing costs.

FUNCTIONAL PROTOTYPES

Create durable, real ABS parts for the production floor. Print dimensionally accurate jigs, fixtures, and end-effectors that fit seamlessly with existing components.