- 100-micron layer resolution – If you know our machines or 3D printing in general, you understand this advancement. The original Replicator was tuned for a 270-micron layer height. 100 microns is nearly three times finer than before, which means the layers are even harder to see and feel. For those keeping score, 100 microns is also a good bit finer than the output on some much more expensive machines.
- Huge 410 cubic inch build volume – MakerBot desktop 3D printers have never had a build volume this big. When we learned more about PLA, which works beautifully with huge builds, we knew we had to increase the build volume. This is 37% larger than the original Replicator. You can make entire projects on one build plate.
- Optimized for MakerBot PLA – Polylactic Acid, derived from corn, has been in our repertoire for a little while, but now we’ve discovered its full power. It doesn’t have an odor, it sticks without sliding, and it makes beautiful things. That’s all there is to it.
- Sleek, sturdy steel – The powder-coated steel frame of the MakerBot Replicator 2 Desktop 3D Printer gives it all the strength it needs for high print speeds. Plus it’s resistant to changes in temperature and humidity.
- Smart new parts — The acrylic build plate pops out for you to grab things easier, and the bearings are oil-infused so you spend less time on maintenance.
Today we reached new heights. If you didn’t catch our livestream, MakerBot CEO Bre Pettis ran down a series of announcements, and we’ll do our best to highlight all of them on the blog. In the meantime, tweet your questions to @makerbot, email us at email@example.com, and leave all your comments and thoughts here on the blog. Ladies and gentlemen of the MakerSphere, meet the MakerBot Replicator 2 Desktop 3D Printer. We launched the original Replicator at CES this year, and since then we’ve been listening to the feedback of our incredible community. We’ve watched this community grow to include moms and dads, teachers, artists, and an exploding number of bold professionals. We’ve always been blown away by our users, but this latter group sparked new inspiration. We saw what the professionals were doing and set out to make a machine for their needs. It’s not a surprise that our own army of engineers understand these needs pretty well. Here’s Bre:
The Replicator 2 introduces the world of prosumer 3D printing. We made it stronger, faster, and finer than the original Replicator, and we optimized it to work with MakerBot PLA Filament. We also blew up the build volume without making the machine itself any bigger. The MakerBot Replicator 2 Desktop 3D Printer is, as the name suggests, a desktop machine, not a it-needs-its-own-room machine. It’s going to fit nicely where you need it and look amazing while it works.
But what’s under the hood?
We hope you’ll put one of these in your office or home office today and start making the things of the future.