×
Account
Printers
Apps
Store
Support
Print bigger and bolder with education resources every step of the way.
Starting at $2,399
Print Bigger and Bolder
Explore 3D printing on a bigger stage, enable students to design bigger and unhindered on an easy-to-use printer.
Resources Every Step of the Way
Join the only 3D printer platform that has been helping educators pioneer 3D printing in the classroom for over 10 years.
From Digital Model to 3D Print
Tap into a 3D printing software with built in features that make 3D printing in the classroom easier than ever before.
More Than Just the 3D Printer
3D printing in the classroom isn’t just about the 3D printer - it’s about the curriculum, the projects, and knowledge that surrounds it. That’s why we’re including printer training, design thinking curriculum and easy access to lesson plans and projects, plus enough filament to print all your students’ projects.
GET TO KNOW THE SKETCH LARGE
Test ideas, print manipulatives and enable design thinking with a platform that grows with you.
Print Bigger and Bolder
Explore 3D printing on a bigger stage, enable students to design bigger and unhindered on an easy-to-use printer.
Streamlining Printing for the Whole Classroom
Join the only 3D printer platform that has been helping educators pioneer 3D printing in the classroom for over 10 years.
Classroom 3D Printing Made Easy
Tap into a 3D printing software with built in features that make 3D printing in the classroom easier than ever before.
Enclosed Printer with Particulate Filter
Place your printer anywhere in the classroom without worrying about curious hands and print with peace of mind with a particulate filter preinstalled in each printer.
Cloud-Based 3D Printer Software
No installation required and the software is always up to date - that means you can access the software the moment your printer arrives.
Heated and Flexible Buildplate
Heated build plate for secure, successful printing and a flexible surface to make removing finished prints a breeze.
Access 600+ Lesson Plans Across All Grade Levels & Subjects
Lower the curriculum planning barrier with over 600 lesson plans made by educators all across the country.
Touch Screen Controls and On-Board Camera
Start, monitor and pause students’ prints with an intuitive interface combined with an onboard camera to make monitoring prints possible from anywhere.
ISTE-certified 3D printer training for both teachers and students
Lower the curriculum planning barrier with over 600 3D printing-integrated lesson plans made by educators from all across the country.
BUILT-IN FEATURES
Minimize the hassle of learning how to operate a new technology and just hit 'print' with SKETCH's built-in printer features to help you along the way.
Print BIG and MORE in less time with the SKETCH Large's bigger print platform.
Printer features that keep 3D printing easy and worry-free.
Enclosed Printer with Particulate Filter
Place your printer anywhere in the classroom without worrying about curious hands and print with peace of mind with a particulate filter preinstalled in each printer.
Heated and Flexible Removable Build plate
Heated build plate for secure, successful printing and a flexible surface to make removing finished prints a breeze.
Touch Screen Controls and 2MP on-board Camera
Start, monitor and pause students’ prints with an intuitive interface combined with an onboard camera to make monitoring prints possible from anywhere.
With the MakerBot SKETCH platform we want you to get the 3D printing solution that’s going to work for your classroom - whether looking to start printing for the first time or moving up to a bigger printer with SKETCH Large.
Build Volume
No project is too big or small for SKETCH, choose the build volume that is right for your classroom.
3D Printer Training & Design Thinking Courses
1 x Teacher Seat in Printer Training Course & Curriculum Creation Course
15 x Student Seats in Printer Training Course & Design Thinking Courses
FREE Classroom 3D Printing Management
FREE, Cloud-based, printer preparation software
Printer Features to Keep 3D Printing Easy and Worry-Free
Flexible Build Plates
Heated Build Stage
Enclosed Print Chamber & Air Filter
Onboard Camera
Spatula & Snippers
Enough Printing for Every Student
3 Spools of Easy to Print, PLA Filament
Scale to Your Classroom Needs
Kick off a 3D printing program in your school with enough printers to handle classroom’ worth of printing, whether you’re starting off 3D printing for the first time, integrating it into other classrooms, or ready to push 3D printing school-wide.
DOUBLE YOUR PRINTING CAPACITY
Avoid getting stuck in the 3D printing bottleneck and print more in half the time.
3D Printer Training & Design Thinking Courses
Self-paced, interactive training that will prepare you and your students for 3D priniting and career-building skills that go beyond the classroom.
Enough Printing for a Whole Semester
Get your time back in the classroom and print across multiple printers simultaneously
From One Classroom to a Whole District
Tap into a scalable platform that can fit the 3D printing needs of teachers across one classroom or a whole school district.
Technical Specs
PRINTING
Print Technology
Fused Deposition Modeling
Build Volume
220mm x 200mm x 250mm
[8.66in x 7.87in x 9.84in]
Layer Resolution
100-400 microns [0.0039 IN-0.0157 IN]
Print mode tuned for 200 microns
Material Diameter
1.75 mm [0.069 in]
Material Compatibility
MakerBot Sketch PLA Material
Extruder Compatibility
MakerBot Sketch Extruder
Nozzle Diameter
0.4 MM [0.015 IN]
Print File Type
.MAKERBOT
TEMPERATURE
Ambient Operating Temperature
15-30°C [59-86°F]
Storage Temperature
0-55°C [32-131°F]
SIZE & WEIGHT
Product Dimensions
547mm (H) x 535mm (W) x 470mm (D)
[21.54in (H) x 21.07in (W) x 18.5in (D)]
Shipping Box
675mm (H) x 569mm (W) x 591mm (D)
[26.57in (H) x 22.4in (W) X 23.27in (D)]
Product Weight
23.2 kg [51.15 lb]
Shipping Weight
32.5kg [71.65 lb]
MECHANICAL
Build Surface
Grip Surface
Build Plate Leveling
Heated with removable flexible build surface
Safety & Compliance
Safety
Fully enclosed
Particulate Filter
UL, CE, FCC
IEC/ EN/ UL60950-1, IEC/ EN/UL 62368-1
SOFTWARE
Software Bundle
MakerBot CloudPrint
Supported File Types
MakerBot (.makerbot)
STL (.stl)
SolidWorks (.sldprt, .sldasm)
InventorOBJ (.ipt, .iam)
IGES (.iges, .igs)
STEP AP203/214 (.step, .stp)
Operating Systems
Windows (7, 10)
Mac OS X (10.12+)
NOTE: Does not support Mac Catalina
ELECTRICAL
Power Requirements
100-240 V, 50-60 HZ
2.7-1.3A
Connectivity
USB, Ethernet, Wifi
CAMERA
Camera resolution
2 megapixels
THANK YOU FOR REQUESTING A QUOTE!
A MakerBot Sales Representative will contact you within 24 business hours to discuss
which MakerBot products would best serve your needs.
Thanks for your interest, MakerBot Team
Request a Quote
Footer
- 3D Printers
- SKETCH<!-- wp:fl-builder/layout -->
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HERO-Sketch-Plarform.png" alt="HERO-Sketch Plarform" itemprop="image" height="800" width="1920" title="HERO-Sketch Plarform" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/SketchPlatform-logo.png" alt="SketchPlatform logo" itemprop="image" height="69" width="1080" title="SketchPlatform logo" onerror="this.style.display='none'" />
<h2>
Classroom 3D printing that scales to your classroom needs
</h2>
<h2>
Starting at <b>$1,299</b>
</h2>
<li><a href="https://store.makerbot.com/test-page" itemprop="url">
SHOP NOW
</a></li>
[geoip-content country="US"]
<li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –>
<script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script>
<style>
h1 {text-align: center;}
</style>
<h1> Request a quote</h1><br>
<p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more.
</p><br>
<form id=”mktoForm_4980″></form>
<script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) {
// assigns values to hidden fields
jQuery(‘input[name=referrer_URL]’).val(window.location.href);
});
// remove form styles
MktoForms2.whenReady(function (form) {
jQuery(‘#mktoForms2BaseStyle’).remove();
jQuery(‘#mktoForms2ThemeStyle’).remove();
});
</script>
</a></li>
[/geoip-content]
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-1.png" alt="Pillar 1" itemprop="image" height="400" width="400" title="Pillar 1" onerror="this.style.display='none'" />
<h5>
Making 3D Printing Possible for Every Student
</h5>
<h4>
Test ideas, grow student engagement, and enable design thinking with a platform that grows with you.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-2.png" alt="Pillar 2" itemprop="image" height="400" width="400" title="Pillar 2" onerror="this.style.display='none'" />
<h5>
Resources for Every Step of the 3D Printing Journey
</h5>
<h4>
Tap into the most acclaimed 3D printer platform for education and get tailored resources every step of the way.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-3.png" alt="Pillar 3" itemprop="image" height="400" width="400" title="Pillar 3" onerror="this.style.display='none'" />
<h5>
From Digital Model to 3D Print with Easy, Classroom Software
</h5>
<h4>
Make 3D printing for the classroom even easier with our free, cloud-based print preparation software.
</h4>
<h1>
GET TO KNOW THE SKETCH PRINTER
</h1>
<h4>
Test ideas, print manipulatives and enable design thinking with a platform that grows with you.
</h4>
<meta itemprop="url" content="https://www.makerbot.com/wp-content/uploads/2022/10/SKETCHLARGE_2022.mp4" />[video mp4="https://www.makerbot.com/wp-content/uploads/2022/10/SKETCHLARGE_2022.mp4" poster="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-META-2.png" autoplay="yes" preload="none"][/video]
<h1>
START <br />3D PRINTING ON DAY ONE
</h1>
<h4>
3D Print Right Out of the Box
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-3Dprinting.png" alt="HEROSQ - 3Dprinting" itemprop="image" height="1080" width="1080" title="HEROSQ - 3Dprinting" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Enclosed-print-volume.png" alt="Enclosed print volume" itemprop="image" height="300" width="500" title="Enclosed print volume" onerror="this.style.display='none'" />
<h5>
A 3D Printer Platform That Fits in Any Classroom
</h5>
<h4>
Whether setting your first print station up with SKETCH or aiming for larger prints with SKETCH Large, the SKETCH Platform has a solution that can fit in any classroom, lab or library.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Students-certification-1.png" alt="Students certification (1)" itemprop="image" height="300" width="500" title="Students certification (1)" onerror="this.style.display='none'" />
<h5>
3D Printer Training
</h5>
<h4>
Access our ISTE-approved guided printer training (included with every SKETCH printer) and gain extra confidence in setting up and printing with the SKETCH 3D printers.
</h4>
<h1>
CURRICULUM THAT’S <br />READY TO GO
</h1>
<h4>
Resources Every Step of the Way
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Frog-1.png" alt="HEROSQ - Frog (1)" itemprop="image" height="785" width="1080" title="HEROSQ - Frog (1)" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-lessons.png" alt="Square lessons" itemprop="image" height="300" width="500" title="Square lessons" onerror="this.style.display='none'" />
<h5>
Access 600+ Lesson Plans Across All Grade Levels & Subjects
</h5>
<h4>
Lower the curriculum planning barrier with over 600 lesson plans made by educators all across the country.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-certification.png" alt="Square certification" itemprop="image" height="300" width="500" title="Square certification" onerror="this.style.display='none'" />
<h5>
Learn How to Create Curriculum with 3D Printing
</h5>
<h4>
Establish yourself and gain confidence as a STEM education leader. Learn how to teach the 3D printing process and develop your own 3D printing projects with our Curriculum Creator training course.
</h4>
<h1>
Classroom Printing Made Easy
</h1>
<h4>
From Digital Model to 3D Print with Easy-to-Use Software
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Zeeguys.png" alt="HEROSQ - Zeeguys" itemprop="image" height="1080" width="1080" title="HEROSQ - Zeeguys" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-Cloudprint.png" alt="Square Cloudprint" itemprop="image" height="300" width="500" title="Square Cloudprint" onerror="this.style.display='none'" />
<h5>
Cloud-Based 3D Printer Software
</h5>
<h4>
Turn your students’ digital models into 3D prints with MakerBot CloudPrint, a cloud-based software that requires no software installation or student account creation.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-touchscreen-1.png" alt="Square touchscreen (1)" itemprop="image" height="300" width="500" title="Square touchscreen (1)" onerror="this.style.display='none'" />
<h5>
Monitor Your Printer from Far Away
</h5>
<h4>
Leverage SKETCH’s onboard camera and the CloudPrint software to monitor your classroom’s prints as their printing – even when you’re away from the classroom.
</h4>
<h1>
BUILT-IN FEATURES
</h1>
<h4>
Minimize the hassle of learning how to operate a new technology and just hit ‘print’ with SKETCH’s built-in printer features to help you along the way.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Buld-bvolume.png" alt="HEROSQ - Buld bvolume" itemprop="image" height="700" width="1080" title="HEROSQ - Buld bvolume" onerror="this.style.display='none'" />
<h2>
Print BIG and MORE in less time with the SKETCH Large’s bigger print platform.
</h2>
<h2>
Printer features that keep 3D printing easy and worry-free.
</h2>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Features.png" alt="HEROSQ - Features" itemprop="image" height="700" width="1080" title="HEROSQ - Features" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Enclosed-printer.png" alt="Enclosed printer" itemprop="image" height="300" width="500" title="Enclosed printer" onerror="this.style.display='none'" />
<h5>
Enclosed Printer with Particulate Filter
</h5>
<h4>
Place your printer anywhere in the classroom without worrying about curious hands and print with peace of mind with a particulate filter preinstalled in each printer.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/flex-plate.png" alt="flex plate" itemprop="image" height="300" width="500" title="flex plate" onerror="this.style.display='none'" />
<h5>
Heated and Flexible Removable Build plate
</h5>
<h4>
Heated build plate for secure, successful printing and a flexible surface to make removing finished prints a breeze.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Camera.png" alt="Camera" itemprop="image" height="300" width="500" title="Camera" onerror="this.style.display='none'" />
<h5>
Touch Screen Controls and 2MP on-board Camera
</h5>
<h4>
Start, monitor and pause students’ prints with an intuitive interface combined with an onboard camera to make monitoring prints possible from anywhere.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/SketchPlatform-logo.png" alt="SketchPlatform logo" itemprop="image" height="69" width="1080" title="SketchPlatform logo" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Platform.png" alt="HEROSQ - Platform" itemprop="image" height="700" width="1080" title="HEROSQ - Platform" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-standard-logo.png" alt="Sketch standard logo" itemprop="image" height="40" width="368" title="Sketch standard logo" onerror="this.style.display='none'" />
<a href="" target="_self" role="button" rel="noopener">
LEARN MORE
</a>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-logo.png" alt="Sketch Large logo" itemprop="image" height="41" width="805" title="Sketch Large logo" onerror="this.style.display='none'" />
<a href="" target="_self" role="button" rel="noopener">
LEARN MORE
</a>
<h4>
With the MakerBot SKETCH platform we want you to get the 3D printing solution that’s going to work for your classroom – whether looking to start printing for the first time or moving up to a bigger printer with SKETCH Large.
</h4>
[geoip-content country="US"]
<li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –>
<script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script>
<style>
h1 {text-align: center;}
</style>
<h1> Request a quote</h1><br>
<p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more.
</p><br>
<form id=”mktoForm_4980″></form>
<script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) {
// assigns values to hidden fields
jQuery(‘input[name=referrer_URL]’).val(window.location.href);
});
// remove form styles
MktoForms2.whenReady(function (form) {
jQuery(‘#mktoForms2BaseStyle’).remove();
jQuery(‘#mktoForms2ThemeStyle’).remove();
});
</script>
</a></li>
[/geoip-content]
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Build-volume-1.png" alt="Build volume (1)" itemprop="image" height="628" width="841" title="Build volume (1)" onerror="this.style.display='none'" />
<h5>
Build Volume
</h5>
<h4>
No project is too big or small for SKETCH, chose the build volume that is right for your classroom.
</h4>
<h5>
3D Printer Training & Design Thinking Courses
</h5>
<h4>
1 x Teacher Seat in Printer Training Course & Curriculum Creation Course <br />15 x Student Seats in Printer Training Course & Design Thinking Courses
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Group-14028.png" alt="Group 14028" itemprop="image" height="558" width="666" title="Group 14028" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Cloudprint.png" alt="Cloudprint" itemprop="image" height="300" width="500" title="Cloudprint" onerror="this.style.display='none'" />
<h5>
FREE Classroom 3D Printing Management
</h5>
<h4>
<b>FREE</b>, Cloud-based, printer preparation software
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Accesories-1.png" alt="Accesories (1)" itemprop="image" height="300" width="500" title="Accesories (1)" onerror="this.style.display='none'" />
<h5>
Printer Features to Keep 3D Printing Easy and Worry-Free
</h5>
<h4>
<br />Flexible Build Plates <br />Heated Build Stage <br />Enclosed Print Chamber & Air Filter <br />Onboard Camera <br />Spatula & Snippers
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/PLA-spools.png" alt="PLA spools" itemprop="image" height="300" width="500" title="PLA spools" onerror="this.style.display='none'" />
<h5>
Enough Printing for Every Student
</h5>
<h4>
3 Spools of Easy to Print, PLA Filament
</h4>
<h1>
Scale to Your Classroom Needs
</h1>
<h4>
Kick off a 3D printing program in your school with enough printers to handle classrooms’ worth of printing.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Group-14010.png" alt="Group 14010" itemprop="image" height="14" width="105" title="Group 14010" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-single.png" alt="Sketch single" itemprop="image" height="300" width="500" title="Sketch single" onerror="this.style.display='none'" />
<h2>
Starting at <b>$1,299</b>
</h2>
<a href="https://store.makerbot.com/3d-printers/sketch/makerbot-sketch-kit-single-printer-setup" target="_self" role="button" rel="noopener">
BUY NOW
</a>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Classroom-logo-2.png" alt="Sketch Classroom logo (2)" itemprop="image" height="58" width="250" title="Sketch Classroom logo (2)" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Scketch-Classroom.png" alt="Scketch Classroom" itemprop="image" height="300" width="500" title="Scketch Classroom" onerror="this.style.display='none'" />
<h2>
Starting at <b>$1,999</b>
</h2>
<a href="https://store.makerbot.com/3d-printers/sketch/sketch-classroom" target="_self" role="button" rel="noopener">
BUY NOW
</a>
<h5>
DOUBLE YOUR PRINTING CAPACITY
</h5>
<h4>
Avoid getting stuck in the 3D printing bottleneck and print more in half the time.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Group-14010.png" alt="Group 14010" itemprop="image" height="14" width="105" title="Group 14010" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Standard.png" alt="Sketch Standard" itemprop="image" height="300" width="500" title="Sketch Standard" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Group-14030.png" alt="Group 14030" itemprop="image" height="57" width="250" title="Group 14030" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-classroom.png" alt="Sketch Large classroom" itemprop="image" height="300" width="500" title="Sketch Large classroom" onerror="this.style.display='none'" />
<h5>
3D Printer Training & Design Thinking Courses
</h5>
<h4>
ISTE-certified 3D printer training and design thinking curriculum for both teachers and students
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Single-certification.png" alt="Single certification" itemprop="image" height="491" width="299" title="Single certification" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Classroom-certification.png" alt="Classroom certification" itemprop="image" height="531" width="357" title="Classroom certification" onerror="this.style.display='none'" />
<h5>
Enough Printing for a Whole Semester
</h5>
<h4>
Get your time back in the classroom and print across multiple printers simultaneously
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Single-Accesories.png" alt="Single Accesories" itemprop="image" height="300" width="500" title="Single Accesories" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Classroom-accesories.png" alt="Classroom accesories" itemprop="image" height="300" width="500" title="Classroom accesories" onerror="this.style.display='none'" />
<h2>
From One Classroom to a Whole District
</h2>
<h4>
Tap into a scalable platform that can fit the 3D printing needs of teachers across one classroom or a whole school district.
</h4>
[geoip-content country="US"]
<li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –>
<script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script>
<style>
h1 {text-align: center;}
</style>
<h1> Request a quote</h1><br>
<p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more.
</p><br>
<form id=”mktoForm_4980″></form>
<script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) {
// assigns values to hidden fields
jQuery(‘input[name=referrer_URL]’).val(window.location.href);
});
// remove form styles
MktoForms2.whenReady(function (form) {
jQuery(‘#mktoForms2BaseStyle’).remove();
jQuery(‘#mktoForms2ThemeStyle’).remove();
});
</script>
</a></li>
[/geoip-content]
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Frame-602.png" alt="Frame 602" itemprop="image" height="570" width="1208" title="Frame 602" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2018/06/lc_close.png" alt="close" />
<h3>THANK YOU FOR REQUESTING A QUOTE!</h3>
<p>A MakerBot Sales Representative will contact you within 24 business hours to discuss<br />which MakerBot products would best serve your needs.</p>
<p>Thanks for your interest, MakerBot Team</p>
<h3 id="mrkto-form-title">Request a Quote</h3>
<!-- Long Form 4151 -->
<form id="mktoForm_4151"></form>
<!-- /wp:fl-builder/layout -->
- SKETCH Classroom<!-- wp:fl-builder/layout --> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/HERO-Sketch-CLASSROOM.png" alt="HERO-Sketch CLASSROOM" itemprop="image" height="800" width="1920" title="HERO-Sketch CLASSROOM" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-standard-logo.png" alt="Sketch standard logo" itemprop="image" height="40" width="368" title="Sketch standard logo" onerror="this.style.display='none'" /> <h2> Pioneer 3D Printing in the Classroom </h2> <h2> Starting at <b>$1,299</b> </h2> <li><a href="https://store.makerbot.com/3d-printers/sketch/makerbot-sketch-kit-single-printer-setup" itemprop="url"> SHOP NOW </a></li> [geoip-content country="US"] <li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –> <script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script> <style> h1 {text-align: center;} </style> <h1> Request a quote</h1><br> <p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more. </p><br> <form id=”mktoForm_4980″></form> <script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) { // assigns values to hidden fields jQuery(‘input[name=referrer_URL]’).val(window.location.href); }); // remove form styles MktoForms2.whenReady(function (form) { jQuery(‘#mktoForms2BaseStyle’).remove(); jQuery(‘#mktoForms2ThemeStyle’).remove(); }); </script> </a></li> [/geoip-content] <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-1.png" alt="Pillar 1" itemprop="image" height="400" width="400" title="Pillar 1" onerror="this.style.display='none'" /> <h5> Making 3D Printing Possible for Every Student </h5> <h4> Fast, reliable, easy-to-use printers designed with print quality and safety in mind </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-2.png" alt="Pillar 2" itemprop="image" height="400" width="400" title="Pillar 2" onerror="this.style.display='none'" /> <h5> Resources Every Step of the Way </h5> <h4> Join the only 3D printer platform that has been helping educators pioneer 3D printing in the classroom for over 10 years. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-3.png" alt="Pillar 3" itemprop="image" height="400" width="400" title="Pillar 3" onerror="this.style.display='none'" /> <h5> From Digital Model to 3D Print </h5> <h4> Tap into a 3D printing software with built in features that make 3D printing in the classroom easier than ever before. </h4> <h1> GET TO KNOW THE SKETCH LARGE </h1> <h4> Test ideas, print manipulatives and enable design thinking with a platform that grows with you. </h4> <meta itemprop="url" content="https://www.makerbot.com/wp-content/uploads/2022/10/SKETCHLARGE_2022.mp4" />[video mp4="https://www.makerbot.com/wp-content/uploads/2022/10/SKETCHLARGE_2022.mp4" poster="" autoplay="yes" loop="yes"][/video] <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Enclosed-printer.png" alt="Enclosed printer" itemprop="image" height="300" width="500" title="Enclosed printer" onerror="this.style.display='none'" /> <h5> Enclosed Printer with Particulate Filter </h5> <h4> Place your printer anywhere in the classroom without worrying about curious hands and print with peace of mind with a particulate filter preinstalled in each printer. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-Cloudprint.png" alt="Square Cloudprint" itemprop="image" height="300" width="500" title="Square Cloudprint" onerror="this.style.display='none'" /> <h5> Cloud-Based 3D Printer Software </h5> <h4> No installation required and the software is always up to date – that means you can access the software the moment your printer arrives. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/flex-plate.png" alt="flex plate" itemprop="image" height="300" width="500" title="flex plate" onerror="this.style.display='none'" /> <h5> Heated and Flexible Buildplate </h5> <h4> Heated build plate for secure, successful printing and a flexible surface to make removing finished prints a breeze. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-lessons.png" alt="Square lessons" itemprop="image" height="300" width="500" title="Square lessons" onerror="this.style.display='none'" /> <h5> Access 600+ Lesson Plans Across All Grade Levels & Subjects </h5> <h4> Lower the curriculum planning barrier with over 600 lesson plans made by educators all across the country. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-touchscreen-1.png" alt="Square touchscreen (1)" itemprop="image" height="300" width="500" title="Square touchscreen (1)" onerror="this.style.display='none'" /> <h5> Touch Screen Controls and On-Board Camera </h5> <h4> Start, monitor and pause students’ prints with an intuitive interface combined with an onboard camera to make monitoring prints possible from anywhere. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-certification.png" alt="Square certification" itemprop="image" height="300" width="500" title="Square certification" onerror="this.style.display='none'" /> <h5> ISTE-certified 3D printer training for both teachers and students </h5> <h4> Lower the curriculum planning barrier with over 600 3D printing-integrated lesson plans made by educators from all across the country. </h4> <h1> Scale to Your Classroom Needs </h1> <h4> Kick off a 3D printing program in your school with enough printers to handle classrooms’ worth of printing. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Standard-logo-1.png" alt="Sketch Standard logo (1)" itemprop="image" height="14" width="100" title="Sketch Standard logo (1)" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-single-1.png" alt="Sketch single (1)" itemprop="image" height="300" width="500" title="Sketch single (1)" onerror="this.style.display='none'" /> <h2> Starting at <b>$1,299</b> </h2> <a href="https://store.makerbot.com/3d-printers/sketch/makerbot-sketch-kit-single-printer-setup" target="_self" role="button" rel="noopener"> BUY NOW </a> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-classroom-logo-3.png" alt="Sketch classroom logo (3)" itemprop="image" height="51" width="250" title="Sketch classroom logo (3)" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Scketch-Classroom-1.png" alt="Scketch Classroom (1)" itemprop="image" height="300" width="500" title="Scketch Classroom (1)" onerror="this.style.display='none'" /> <h2> Starting at <b>$1,999</b> </h2> <a href="https://store.makerbot.com/3d-printers/sketch/sketch-classroom" target="_self" role="button" rel="noopener"> BUY NOW </a> <h5> DOUBLE YOUR PRINTING CAPACITY </h5> <h4> Avoid getting stuck in the 3D printing bottleneck and print more in half the time. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-single-unit.png" alt="Sketch single unit" itemprop="image" height="300" width="500" title="Sketch single unit" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-classroom-two.png" alt="Sketch classroom two" itemprop="image" height="300" width="500" title="Sketch classroom two" onerror="this.style.display='none'" /> <h5> 3D Printer Training & Design Thinking Courses </h5> <h4> ISTE-certified 3D printer training and design thinking curriculum for both teachers and students </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Certification-sketch-single.png" alt="Certification sketch single" itemprop="image" height="463" width="299" title="Certification sketch single" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Certification-Sketch-classroom.png" alt="Certification Sketch classroom" itemprop="image" height="504" width="357" title="Certification Sketch classroom" onerror="this.style.display='none'" /> <h5> Enough Printing for a Whole Semester </h5> <h4> Get your time back in the classroom and print across multiple printers simultaneously </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Single-Accesories.png" alt="Single Accesories" itemprop="image" height="300" width="500" title="Single Accesories" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Classroom-accesories.png" alt="Classroom accesories" itemprop="image" height="300" width="500" title="Classroom accesories" onerror="this.style.display='none'" /> <h2> From One Classroom to a Whole District </h2> <h4> Tap into a scalable platform that can fit the 3D printing needs of teachers across one classroom or a whole school district. </h4> [geoip-content country="US"] <li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –> <script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script> <style> h1 {text-align: center;} </style> <h1> Request a quote</h1><br> <p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more. </p><br> <form id=”mktoForm_4980″></form> <script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) { // assigns values to hidden fields jQuery(‘input[name=referrer_URL]’).val(window.location.href); }); // remove form styles MktoForms2.whenReady(function (form) { jQuery(‘#mktoForms2BaseStyle’).remove(); jQuery(‘#mktoForms2ThemeStyle’).remove(); }); </script> </a></li> [/geoip-content] <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Frame-602.png" alt="Frame 602" itemprop="image" height="570" width="1208" title="Frame 602" onerror="this.style.display='none'" /> <h2> Technical Specs </h2> <h3>PRINTING</h3> <strong>Print Technology</strong><br /> Fused Deposition Modeling <strong>Build Volume</strong><br /> 150mm x 150mm x 150mm<br /> [5.9in x 5.9in x 5.9in] <strong>Layer Resolution</strong><br /> 100-400 microns [0.0039 IN-0.0157 IN]<br /> Print mode tuned for 200 microns <strong>Material Diameter</strong><br /> 1.75 mm [0.069 in] <strong>Material Compatibility</strong><br /> MakerBot Sketch PLA Material<br /> MakerBot Sketch Tough Material <strong>Extruder Compatibility</strong><br /> MakerBot Sketch Extruder <strong>Nozzle Diameter</strong><br /> 0.4 MM [0.015 IN] <strong>Print File Type</strong><br /> .MAKERBOT <h3>TEMPERATURE</h3> <strong>Ambient Operating Temperature</strong><br /> 15-30°C [59-86°F] <strong>Storage Temperature</strong><br /> 0-55°C [32-131°F] <p> </p> <h3>SIZE & WEIGHT</h3> <strong>Product Dimensions</strong><br /> 433.4mm (H) x 423.1mm (W) x 365.0mm (D)<br /> [17in (H) x 16.6in (W) x 14.4in (D)] <strong>Shipping Box</strong><br /> 549mm (H) x 517mm (W) x 46mm (D)<br /> [21.625in (H) x 20.375in (W) X 18.25in (D)] <strong>Product Weight</strong><br /> 11.8 kg [26 lb] <strong>Shipping Weight</strong><br /> 17kg [37.5 lb] <h3>MECHANICAL</h3> <strong>Build Surface</strong><br /> Grip Surface <strong>Build Plate Leveling</strong><br /> Heated with removable flexible build surface <h3>Safety & Compliance</h3> <strong>Safety</strong><br /> Fully enclosed<br /> Particulate Filter<br /> UL, CE, FCC<br /> IEC/ EN/ UL60950-1, IEC/ EN/UL 62368-1<br /> <h3>SOFTWARE</h3> <strong>Software Bundle</strong><br /> MakerBot CloudPrint <strong>Supported File Types</strong><br /> MakerBot (.makerbot)<br /> STL (.stl)<br /> SolidWorks (.sldprt, .sldasm)<br /> InventorOBJ (.ipt, .iam)<br /> IGES (.iges, .igs)<br /> STEP AP203/214 (.step, .stp)<br /> CATIA (.CATPart, .CATProduct)<br /> Wavefront Object (.obj)<br /> Unigraphics/NX (.prt)<br /> Solid Edge (.par, .asm)<br /> ProE/Creo (.prt, .prt., .asm, .asm.)<br /> VRML (.wrl) <strong>Operating Systems</strong><br /> Windows (7, 10)<br /> Mac OS X (10.12+)<br /> NOTE: Does not support Mac Catalina <strong>CAD Plugins</strong><br /> SolidWorks, Autodesk Fusion 360, Onshape, Autodesk Inventor <h3>ELECTRICAL</h3> <strong>Power Requirements</strong><br /> 100-240 V, 50-60 HZ<br /> 2.7-1.3A <strong>Connectivity</strong><br /> USB, Ethernet, Wifi <h3>CAMERA</h3> <strong>Camera resolution</strong><br /> 2 megapixels <p> </p> <img src="https://www.makerbot.com/wp-content/uploads/2018/06/lc_close.png" alt="close" /> <h3>THANK YOU FOR REQUESTING A QUOTE!</h3> <p>A MakerBot Sales Representative will contact you within 24 business hours to discuss<br />which MakerBot products would best serve your needs.</p> <p>Thanks for your interest, MakerBot Team</p> <h3 id="mrkto-form-title">Request a Quote</h3> <!-- Long Form 4151 --> <form id="mktoForm_4151"></form> <!-- /wp:fl-builder/layout -->
- SKETCH Large<!-- wp:fl-builder/layout --> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/HERO-Sketch-Large.png" alt="HERO-Sketch Large" itemprop="image" height="800" width="1920" title="HERO-Sketch Large" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-logo-1.png" alt="Sketch Large logo (1)" itemprop="image" height="53" width="1066" title="Sketch Large logo (1)" onerror="this.style.display='none'" /> <h2> Print bigger and bolder with education resources every step of the way. </h2> <h2> Starting at <b>$2,399</b> </h2> <li><a href="https://store.makerbot.com/sketch-large-single-printer-setup" itemprop="url"> SHOP NOW </a></li> [geoip-content country="US"] <li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –> <script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script> <style> h1 {text-align: center;} </style> <h1> Request a quote</h1><br> <p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more. </p><br> <form id=”mktoForm_4980″></form> <script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) { // assigns values to hidden fields jQuery(‘input[name=referrer_URL]’).val(window.location.href); }); // remove form styles MktoForms2.whenReady(function (form) { jQuery(‘#mktoForms2BaseStyle’).remove(); jQuery(‘#mktoForms2ThemeStyle’).remove(); }); </script> </a></li> [/geoip-content] <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-1.png" alt="Pillar 1" itemprop="image" height="400" width="400" title="Pillar 1" onerror="this.style.display='none'" /> <h5> Print Bigger and Bolder </h5> <h4> Explore 3D printing on a bigger stage, enable students to design bigger and unhindered on an easy-to-use printer. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-2.png" alt="Pillar 2" itemprop="image" height="400" width="400" title="Pillar 2" onerror="this.style.display='none'" /> <h5> Resources Every Step of the Way </h5> <h4> Join the only 3D printer platform that has been helping educators pioneer 3D printing in the classroom for over 10 years. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-3.png" alt="Pillar 3" itemprop="image" height="400" width="400" title="Pillar 3" onerror="this.style.display='none'" /> <h5> From Digital Model to 3D Print </h5> <h4> Tap into a 3D printing software with built in features that make 3D printing in the classroom easier than ever before. </h4> <h1> More Than Just the 3D Printer </h1> <h4> 3D printing in the classroom isn’t just about the 3D printer – it’s about the curriculum, the projects, and knowledge that surrounds it. That’s why we’re including printer training, design thinking curriculum and easy access to lesson plans and projects, plus enough filament to print all your students’ projects. </h4> <h1> GET TO KNOW THE SKETCH LARGE </h1> <h4> Test ideas, print manipulatives and enable design thinking with a platform that grows with you. </h4> <meta itemprop="url" content="https://www.makerbot.com/wp-content/uploads/2022/10/SKETCHLARGE_2022.mp4" />[video mp4="https://www.makerbot.com/wp-content/uploads/2022/10/SKETCHLARGE_2022.mp4" poster="" autoplay="yes" loop="yes"][/video] <img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Zeeguys-skethc-large.png" alt="HEROSQ - Zeeguys skethc large" itemprop="image" height="1080" width="1080" title="HEROSQ - Zeeguys skethc large" onerror="this.style.display='none'" /> <h1> Print Bigger and Bolder </h1> <h4> Explore 3D printing on a bigger stage, enable students to design bigger and unhindered on an easy-to-use printer. </h4> <h1> Streamlining Printing for the Whole Classroom </h1> <h4> Join the only 3D printer platform that has been helping educators pioneer 3D printing in the classroom for over 10 years. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-multibody.png" alt="HEROSQ - multibody" itemprop="image" height="600" width="1080" title="HEROSQ - multibody" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-gears.png" alt="HEROSQ - gears" itemprop="image" height="600" width="1080" title="HEROSQ - gears" onerror="this.style.display='none'" /> <h1> Classroom 3D Printing Made Easy </h1> <h4> Tap into a 3D printing software with built in features that make 3D printing in the classroom easier than ever before. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Enclosed-printer.png" alt="Enclosed printer" itemprop="image" height="300" width="500" title="Enclosed printer" onerror="this.style.display='none'" /> <h5> Enclosed Printer with Particulate Filter </h5> <h4> Place your printer anywhere in the classroom without worrying about curious hands and print with peace of mind with a particulate filter preinstalled in each printer. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-Cloudprint.png" alt="Square Cloudprint" itemprop="image" height="300" width="500" title="Square Cloudprint" onerror="this.style.display='none'" /> <h5> Cloud-Based 3D Printer Software </h5> <h4> No installation required and the software is always up to date – that means you can access the software the moment your printer arrives. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/flex-plate.png" alt="flex plate" itemprop="image" height="300" width="500" title="flex plate" onerror="this.style.display='none'" /> <h5> Heated and Flexible Buildplate </h5> <h4> Heated build plate for secure, successful printing and a flexible surface to make removing finished prints a breeze. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-lessons.png" alt="Square lessons" itemprop="image" height="300" width="500" title="Square lessons" onerror="this.style.display='none'" /> <h5> Access 600+ Lesson Plans Across All Grade Levels & Subjects </h5> <h4> Lower the curriculum planning barrier with over 600 lesson plans made by educators all across the country. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-touchscreen-1.png" alt="Square touchscreen (1)" itemprop="image" height="300" width="500" title="Square touchscreen (1)" onerror="this.style.display='none'" /> <h5> Touch Screen Controls and On-Board Camera </h5> <h4> Start, monitor and pause students’ prints with an intuitive interface combined with an onboard camera to make monitoring prints possible from anywhere. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-certification.png" alt="Square certification" itemprop="image" height="300" width="500" title="Square certification" onerror="this.style.display='none'" /> <h5> ISTE-certified 3D printer training for both teachers and students </h5> <h4> Lower the curriculum planning barrier with over 600 3D printing-integrated lesson plans made by educators from all across the country. </h4> <h1> BUILT-IN FEATURES </h1> <h4> Minimize the hassle of learning how to operate a new technology and just hit ‘print’ with SKETCH’s built-in printer features to help you along the way. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Buld-bvolume-Sketch-large.png" alt="HEROSQ - Buld bvolume Sketch large" itemprop="image" height="700" width="1080" title="HEROSQ - Buld bvolume Sketch large" onerror="this.style.display='none'" /> <h2> Print BIG and MORE in less time with the SKETCH Large’s bigger print platform. </h2> <h2> Printer features that keep 3D printing easy and worry-free. </h2> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Features-hero-Sketch-Large.png" alt="Features hero Sketch Large" itemprop="image" height="700" width="1080" title="Features hero Sketch Large" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Enclosed-printer.png" alt="Enclosed printer" itemprop="image" height="300" width="500" title="Enclosed printer" onerror="this.style.display='none'" /> <h5> Enclosed Printer with Particulate Filter </h5> <h4> Place your printer anywhere in the classroom without worrying about curious hands and print with peace of mind with a particulate filter preinstalled in each printer. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/flex-plate.png" alt="flex plate" itemprop="image" height="300" width="500" title="flex plate" onerror="this.style.display='none'" /> <h5> Heated and Flexible Removable Build plate </h5> <h4> Heated build plate for secure, successful printing and a flexible surface to make removing finished prints a breeze. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Camera.png" alt="Camera" itemprop="image" height="300" width="500" title="Camera" onerror="this.style.display='none'" /> <h5> Touch Screen Controls and 2MP on-board Camera </h5> <h4> Start, monitor and pause students’ prints with an intuitive interface combined with an onboard camera to make monitoring prints possible from anywhere. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-logo.png" alt="Sketch Large logo" itemprop="image" height="41" width="805" title="Sketch Large logo" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/HERO-Sketch-Large.png" alt="HERO-Sketch Large" itemprop="image" height="800" width="1920" title="HERO-Sketch Large" onerror="this.style.display='none'" /> <a href="https://store.makerbot.com/sketch-large-single-printer-setup" target="_self" role="button" rel="noopener"> BUY NOW </a> <h4> With the MakerBot SKETCH platform we want you to get the 3D printing solution that’s going to work for your classroom – whether looking to start printing for the first time or moving up to a bigger printer with SKETCH Large. </h4> [geoip-content country="US"] <li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –> <script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script> <style> h1 {text-align: center;} </style> <h1> Request a quote</h1><br> <p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more. </p><br> <form id=”mktoForm_4980″></form> <script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) { // assigns values to hidden fields jQuery(‘input[name=referrer_URL]’).val(window.location.href); }); // remove form styles MktoForms2.whenReady(function (form) { jQuery(‘#mktoForms2BaseStyle’).remove(); jQuery(‘#mktoForms2ThemeStyle’).remove(); }); </script> </a></li> [/geoip-content] <h5> Build Volume </h5> <h4> No project is too big or small for SKETCH, chose the build volume that is right for your classroom. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Group-14033.png" alt="Group 14033" itemprop="image" height="517" width="714" title="Group 14033" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Group-14032-1.png" alt="Group 14032 (1)" itemprop="image" height="532" width="568" title="Group 14032 (1)" onerror="this.style.display='none'" /> <h5> 3D Printer Training & Design Thinking Courses </h5> <h4> 1 x Teacher Seat in Printer Training Course & Curriculum Creation Course <br />15 x Student Seats in Printer Training Course & Design Thinking Courses </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Cloudprint.png" alt="Cloudprint" itemprop="image" height="300" width="500" title="Cloudprint" onerror="this.style.display='none'" /> <h5> FREE Classroom 3D Printing Management </h5> <h4> <b>FREE</b>, Cloud-based, printer preparation software </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Accesories-1.png" alt="Accesories (1)" itemprop="image" height="300" width="500" title="Accesories (1)" onerror="this.style.display='none'" /> <h5> Printer Features to Keep 3D Printing Easy and Worry-Free </h5> <h4> <br />Flexible Build Plates <br />Heated Build Stage <br />Enclosed Print Chamber & Air Filter <br />Onboard Camera <br />Spatula & Snippers </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/PLA-spools.png" alt="PLA spools" itemprop="image" height="300" width="500" title="PLA spools" onerror="this.style.display='none'" /> <h5> Enough Printing for Every Student </h5> <h4> 3 Spools of Easy to Print, PLA Filament </h4> <h1> Scale to Your Classroom Needs </h1> <h4> Kick off a 3D printing program in your school with enough printers to handle classrooms’ worth of printing. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-single.png" alt="Sketch Large single" itemprop="image" height="300" width="500" title="Sketch Large single" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-logo-sm-1.png" alt="Sketch Large logo sm (1)" itemprop="image" height="14" width="228" title="Sketch Large logo sm (1)" onerror="this.style.display='none'" /> <h2> Starting at <b>$2,399</b> </h2> [geoip-content country="US"] <li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –> <script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script> <style> h1 {text-align: center;} </style> <h1> Request a quote</h1><br> <p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more. </p><br> <form id=”mktoForm_4980″></form> <script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) { // assigns values to hidden fields jQuery(‘input[name=referrer_URL]’).val(window.location.href); }); // remove form styles MktoForms2.whenReady(function (form) { jQuery(‘#mktoForms2BaseStyle’).remove(); jQuery(‘#mktoForms2ThemeStyle’).remove(); }); </script> </a></li> [/geoip-content] <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-classroom-1.png" alt="Sketch Large classroom (1)" itemprop="image" height="300" width="500" title="Sketch Large classroom (1)" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-large-logo-sm.png" alt="Sketch large logo sm" itemprop="image" height="55" width="250" title="Sketch large logo sm" onerror="this.style.display='none'" /> <h2> Starting at <b>$3,998</b> </h2> [geoip-content country="US"] <li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –> <script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script> <style> h1 {text-align: center;} </style> <h1> Request a quote</h1><br> <p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more. </p><br> <form id=”mktoForm_4980″></form> <script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) { // assigns values to hidden fields jQuery(‘input[name=referrer_URL]’).val(window.location.href); }); // remove form styles MktoForms2.whenReady(function (form) { jQuery(‘#mktoForms2BaseStyle’).remove(); jQuery(‘#mktoForms2ThemeStyle’).remove(); }); </script> </a></li> [/geoip-content] <h5> DOUBLE YOUR PRINTING CAPACITY </h5> <h4> Avoid getting stuck in the 3D printing bottleneck and print more in half the time. </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-single-unit.png" alt="Sketch Large single unit" itemprop="image" height="300" width="500" title="Sketch Large single unit" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-classroom-two.png" alt="Sketch Large classroom two" itemprop="image" height="300" width="500" title="Sketch Large classroom two" onerror="this.style.display='none'" /> <h5> 3D Printer Training & Design Thinking Courses </h5> <h4> ISTE-certified 3D printer training and design thinking curriculum for both teachers and students </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Classroom-certification-1.png" alt="Classroom certification (1)" itemprop="image" height="531" width="315" title="Classroom certification (1)" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Classroom-certification.png" alt="Classroom certification" itemprop="image" height="531" width="357" title="Classroom certification" onerror="this.style.display='none'" /> <h5> Enough Printing for a Whole Semester </h5> <h4> Get your time back in the classroom and print across multiple printers simultaneously </h4> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Single-Accesories.png" alt="Single Accesories" itemprop="image" height="300" width="500" title="Single Accesories" onerror="this.style.display='none'" /> <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Classroom-accesories.png" alt="Classroom accesories" itemprop="image" height="300" width="500" title="Classroom accesories" onerror="this.style.display='none'" /> <h2> From One Classroom to a Whole District </h2> <h4> Tap into a scalable platform that can fit the 3D printing needs of teachers across one classroom or a whole school district. </h4> [geoip-content country="US"] <li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –> <script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script> <style> h1 {text-align: center;} </style> <h1> Request a quote</h1><br> <p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more. </p><br> <form id=”mktoForm_4980″></form> <script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) { // assigns values to hidden fields jQuery(‘input[name=referrer_URL]’).val(window.location.href); }); // remove form styles MktoForms2.whenReady(function (form) { jQuery(‘#mktoForms2BaseStyle’).remove(); jQuery(‘#mktoForms2ThemeStyle’).remove(); }); </script> </a></li> [/geoip-content] <img src="https://www.makerbot.com/wp-content/uploads/2022/10/Frame-602.png" alt="Frame 602" itemprop="image" height="570" width="1208" title="Frame 602" onerror="this.style.display='none'" /> <h2> Technical Specs </h2> <h3>PRINTING</h3> <strong>Print Technology</strong><br /> Fused Deposition Modeling <strong>Build Volume</strong><br /> 220mm x 200mm x 250mm<br /> [8.66in x 7.87in x 9.84in] <strong>Layer Resolution</strong><br /> 100-400 microns [0.0039 IN-0.0157 IN]<br /> Print mode tuned for 200 microns <strong>Material Diameter</strong><br /> 1.75 mm [0.069 in] <strong>Material Compatibility</strong><br /> MakerBot Sketch PLA Material <strong>Extruder Compatibility</strong><br /> MakerBot Sketch Extruder <strong>Nozzle Diameter</strong><br /> 0.4 MM [0.015 IN] <strong>Print File Type</strong><br /> .MAKERBOT <h3>TEMPERATURE</h3> <strong>Ambient Operating Temperature</strong><br /> 15-30°C [59-86°F] <strong>Storage Temperature</strong><br /> 0-55°C [32-131°F] <p> </p> <h3>SIZE & WEIGHT</h3> <strong>Product Dimensions</strong><br /> 547mm (H) x 535mm (W) x 470mm (D)<br /> [21.54in (H) x 21.07in (W) x 18.5in (D)] <strong>Shipping Box</strong><br /> 675mm (H) x 569mm (W) x 591mm (D)<br /> [26.57in (H) x 22.4in (W) X 23.27in (D)] <strong>Product Weight</strong><br /> 23.2 kg [51.15 lb] <strong>Shipping Weight</strong><br /> 32.5kg [71.65 lb] <h3>MECHANICAL</h3> <strong>Build Surface</strong><br /> Grip Surface <strong>Build Plate Leveling</strong><br /> Heated with removable flexible build surface <h3>Safety & Compliance</h3> <strong>Safety</strong><br /> Fully enclosed<br /> Particulate Filter<br /> UL, CE, FCC<br /> IEC/ EN/ UL60950-1, IEC/ EN/UL 62368-1 <h3>SOFTWARE</h3> <strong>Software Bundle</strong><br /> MakerBot Print Software <strong>Supported File Types</strong><br /> MakerBot (.makerbot)<br /> STL (.stl)<br /> SolidWorks (.sldprt, .sldasm)<br /> InventorOBJ (.ipt, .iam)<br /> IGES (.iges, .igs)<br /> STEP AP203/214 (.step, .stp) <strong>Operating Systems</strong><br /> Windows (7, 10)<br /> Mac OS X (10.12+)<br /> NOTE: Does not support Mac Catalina <h3>ELECTRICAL</h3> <strong>Power Requirements</strong><br /> 100-240 V, 50-60 HZ<br /> 2.7-1.3A <strong>Connectivity</strong><br /> USB, Ethernet, Wifi <h3>CAMERA</h3> <strong>Camera resolution</strong><br /> 2 megapixels <p> </p> <img src="https://www.makerbot.com/wp-content/uploads/2018/06/lc_close.png" alt="close" /> <h3>THANK YOU FOR REQUESTING A QUOTE!</h3> <p>A MakerBot Sales Representative will contact you within 24 business hours to discuss<br />which MakerBot products would best serve your needs.</p> <p>Thanks for your interest, MakerBot Team</p> <h3 id="mrkto-form-title">Request a Quote</h3> <!-- Long Form 4151 --> <form id="mktoForm_4151"></form> <!-- /wp:fl-builder/layout -->
- Replicator Series
- METHOD
- ACCESORIES
- MakerCare
- Request a Quote<!-- Long Form 3920 --> <script src="//pages.makerbot.com/js/forms2/js/forms2.min.js"></script> <style> h1 {text-align: center;} </style> <h1> Request a Quote today</h1><br> <form id="mktoForm_3920"></form> <script>MktoForms2.loadForm("//pages.makerbot.com", "444-ZTM-866", 3920, function (form) { // assigns values to hidden fields jQuery('input[name=referrer_URL]').val(window.location.href); }); // remove form styles MktoForms2.whenReady(function (form) { jQuery('#mktoForms2BaseStyle').remove(); jQuery('#mktoForms2ThemeStyle').remove(); }); </script>
- Buy
- SKETCH<!-- wp:fl-builder/layout -->
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HERO-Sketch-Plarform.png" alt="HERO-Sketch Plarform" itemprop="image" height="800" width="1920" title="HERO-Sketch Plarform" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/SketchPlatform-logo.png" alt="SketchPlatform logo" itemprop="image" height="69" width="1080" title="SketchPlatform logo" onerror="this.style.display='none'" />
<h2>
Classroom 3D printing that scales to your classroom needs
</h2>
<h2>
Starting at <b>$1,299</b>
</h2>
<li><a href="https://store.makerbot.com/test-page" itemprop="url">
SHOP NOW
</a></li>
[geoip-content country="US"]
<li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –>
<script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script>
<style>
h1 {text-align: center;}
</style>
<h1> Request a quote</h1><br>
<p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more.
</p><br>
<form id=”mktoForm_4980″></form>
<script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) {
// assigns values to hidden fields
jQuery(‘input[name=referrer_URL]’).val(window.location.href);
});
// remove form styles
MktoForms2.whenReady(function (form) {
jQuery(‘#mktoForms2BaseStyle’).remove();
jQuery(‘#mktoForms2ThemeStyle’).remove();
});
</script>
</a></li>
[/geoip-content]
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-1.png" alt="Pillar 1" itemprop="image" height="400" width="400" title="Pillar 1" onerror="this.style.display='none'" />
<h5>
Making 3D Printing Possible for Every Student
</h5>
<h4>
Test ideas, grow student engagement, and enable design thinking with a platform that grows with you.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-2.png" alt="Pillar 2" itemprop="image" height="400" width="400" title="Pillar 2" onerror="this.style.display='none'" />
<h5>
Resources for Every Step of the 3D Printing Journey
</h5>
<h4>
Tap into the most acclaimed 3D printer platform for education and get tailored resources every step of the way.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Pillar-3.png" alt="Pillar 3" itemprop="image" height="400" width="400" title="Pillar 3" onerror="this.style.display='none'" />
<h5>
From Digital Model to 3D Print with Easy, Classroom Software
</h5>
<h4>
Make 3D printing for the classroom even easier with our free, cloud-based print preparation software.
</h4>
<h1>
GET TO KNOW THE SKETCH PRINTER
</h1>
<h4>
Test ideas, print manipulatives and enable design thinking with a platform that grows with you.
</h4>
<meta itemprop="url" content="https://www.makerbot.com/wp-content/uploads/2022/10/SKETCHLARGE_2022.mp4" />[video mp4="https://www.makerbot.com/wp-content/uploads/2022/10/SKETCHLARGE_2022.mp4" poster="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-META-2.png" autoplay="yes" preload="none"][/video]
<h1>
START <br />3D PRINTING ON DAY ONE
</h1>
<h4>
3D Print Right Out of the Box
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-3Dprinting.png" alt="HEROSQ - 3Dprinting" itemprop="image" height="1080" width="1080" title="HEROSQ - 3Dprinting" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Enclosed-print-volume.png" alt="Enclosed print volume" itemprop="image" height="300" width="500" title="Enclosed print volume" onerror="this.style.display='none'" />
<h5>
A 3D Printer Platform That Fits in Any Classroom
</h5>
<h4>
Whether setting your first print station up with SKETCH or aiming for larger prints with SKETCH Large, the SKETCH Platform has a solution that can fit in any classroom, lab or library.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Students-certification-1.png" alt="Students certification (1)" itemprop="image" height="300" width="500" title="Students certification (1)" onerror="this.style.display='none'" />
<h5>
3D Printer Training
</h5>
<h4>
Access our ISTE-approved guided printer training (included with every SKETCH printer) and gain extra confidence in setting up and printing with the SKETCH 3D printers.
</h4>
<h1>
CURRICULUM THAT’S <br />READY TO GO
</h1>
<h4>
Resources Every Step of the Way
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Frog-1.png" alt="HEROSQ - Frog (1)" itemprop="image" height="785" width="1080" title="HEROSQ - Frog (1)" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-lessons.png" alt="Square lessons" itemprop="image" height="300" width="500" title="Square lessons" onerror="this.style.display='none'" />
<h5>
Access 600+ Lesson Plans Across All Grade Levels & Subjects
</h5>
<h4>
Lower the curriculum planning barrier with over 600 lesson plans made by educators all across the country.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-certification.png" alt="Square certification" itemprop="image" height="300" width="500" title="Square certification" onerror="this.style.display='none'" />
<h5>
Learn How to Create Curriculum with 3D Printing
</h5>
<h4>
Establish yourself and gain confidence as a STEM education leader. Learn how to teach the 3D printing process and develop your own 3D printing projects with our Curriculum Creator training course.
</h4>
<h1>
Classroom Printing Made Easy
</h1>
<h4>
From Digital Model to 3D Print with Easy-to-Use Software
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Zeeguys.png" alt="HEROSQ - Zeeguys" itemprop="image" height="1080" width="1080" title="HEROSQ - Zeeguys" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-Cloudprint.png" alt="Square Cloudprint" itemprop="image" height="300" width="500" title="Square Cloudprint" onerror="this.style.display='none'" />
<h5>
Cloud-Based 3D Printer Software
</h5>
<h4>
Turn your students’ digital models into 3D prints with MakerBot CloudPrint, a cloud-based software that requires no software installation or student account creation.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Square-touchscreen-1.png" alt="Square touchscreen (1)" itemprop="image" height="300" width="500" title="Square touchscreen (1)" onerror="this.style.display='none'" />
<h5>
Monitor Your Printer from Far Away
</h5>
<h4>
Leverage SKETCH’s onboard camera and the CloudPrint software to monitor your classroom’s prints as their printing – even when you’re away from the classroom.
</h4>
<h1>
BUILT-IN FEATURES
</h1>
<h4>
Minimize the hassle of learning how to operate a new technology and just hit ‘print’ with SKETCH’s built-in printer features to help you along the way.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Buld-bvolume.png" alt="HEROSQ - Buld bvolume" itemprop="image" height="700" width="1080" title="HEROSQ - Buld bvolume" onerror="this.style.display='none'" />
<h2>
Print BIG and MORE in less time with the SKETCH Large’s bigger print platform.
</h2>
<h2>
Printer features that keep 3D printing easy and worry-free.
</h2>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Features.png" alt="HEROSQ - Features" itemprop="image" height="700" width="1080" title="HEROSQ - Features" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Enclosed-printer.png" alt="Enclosed printer" itemprop="image" height="300" width="500" title="Enclosed printer" onerror="this.style.display='none'" />
<h5>
Enclosed Printer with Particulate Filter
</h5>
<h4>
Place your printer anywhere in the classroom without worrying about curious hands and print with peace of mind with a particulate filter preinstalled in each printer.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/flex-plate.png" alt="flex plate" itemprop="image" height="300" width="500" title="flex plate" onerror="this.style.display='none'" />
<h5>
Heated and Flexible Removable Build plate
</h5>
<h4>
Heated build plate for secure, successful printing and a flexible surface to make removing finished prints a breeze.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Camera.png" alt="Camera" itemprop="image" height="300" width="500" title="Camera" onerror="this.style.display='none'" />
<h5>
Touch Screen Controls and 2MP on-board Camera
</h5>
<h4>
Start, monitor and pause students’ prints with an intuitive interface combined with an onboard camera to make monitoring prints possible from anywhere.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/SketchPlatform-logo.png" alt="SketchPlatform logo" itemprop="image" height="69" width="1080" title="SketchPlatform logo" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/HEROSQ-Platform.png" alt="HEROSQ - Platform" itemprop="image" height="700" width="1080" title="HEROSQ - Platform" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-standard-logo.png" alt="Sketch standard logo" itemprop="image" height="40" width="368" title="Sketch standard logo" onerror="this.style.display='none'" />
<a href="" target="_self" role="button" rel="noopener">
LEARN MORE
</a>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-logo.png" alt="Sketch Large logo" itemprop="image" height="41" width="805" title="Sketch Large logo" onerror="this.style.display='none'" />
<a href="" target="_self" role="button" rel="noopener">
LEARN MORE
</a>
<h4>
With the MakerBot SKETCH platform we want you to get the 3D printing solution that’s going to work for your classroom – whether looking to start printing for the first time or moving up to a bigger printer with SKETCH Large.
</h4>
[geoip-content country="US"]
<li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –>
<script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script>
<style>
h1 {text-align: center;}
</style>
<h1> Request a quote</h1><br>
<p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more.
</p><br>
<form id=”mktoForm_4980″></form>
<script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) {
// assigns values to hidden fields
jQuery(‘input[name=referrer_URL]’).val(window.location.href);
});
// remove form styles
MktoForms2.whenReady(function (form) {
jQuery(‘#mktoForms2BaseStyle’).remove();
jQuery(‘#mktoForms2ThemeStyle’).remove();
});
</script>
</a></li>
[/geoip-content]
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Build-volume-1.png" alt="Build volume (1)" itemprop="image" height="628" width="841" title="Build volume (1)" onerror="this.style.display='none'" />
<h5>
Build Volume
</h5>
<h4>
No project is too big or small for SKETCH, chose the build volume that is right for your classroom.
</h4>
<h5>
3D Printer Training & Design Thinking Courses
</h5>
<h4>
1 x Teacher Seat in Printer Training Course & Curriculum Creation Course <br />15 x Student Seats in Printer Training Course & Design Thinking Courses
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Group-14028.png" alt="Group 14028" itemprop="image" height="558" width="666" title="Group 14028" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Cloudprint.png" alt="Cloudprint" itemprop="image" height="300" width="500" title="Cloudprint" onerror="this.style.display='none'" />
<h5>
FREE Classroom 3D Printing Management
</h5>
<h4>
<b>FREE</b>, Cloud-based, printer preparation software
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Accesories-1.png" alt="Accesories (1)" itemprop="image" height="300" width="500" title="Accesories (1)" onerror="this.style.display='none'" />
<h5>
Printer Features to Keep 3D Printing Easy and Worry-Free
</h5>
<h4>
<br />Flexible Build Plates <br />Heated Build Stage <br />Enclosed Print Chamber & Air Filter <br />Onboard Camera <br />Spatula & Snippers
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/PLA-spools.png" alt="PLA spools" itemprop="image" height="300" width="500" title="PLA spools" onerror="this.style.display='none'" />
<h5>
Enough Printing for Every Student
</h5>
<h4>
3 Spools of Easy to Print, PLA Filament
</h4>
<h1>
Scale to Your Classroom Needs
</h1>
<h4>
Kick off a 3D printing program in your school with enough printers to handle classrooms’ worth of printing.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Group-14010.png" alt="Group 14010" itemprop="image" height="14" width="105" title="Group 14010" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-single.png" alt="Sketch single" itemprop="image" height="300" width="500" title="Sketch single" onerror="this.style.display='none'" />
<h2>
Starting at <b>$1,299</b>
</h2>
<a href="https://store.makerbot.com/3d-printers/sketch/makerbot-sketch-kit-single-printer-setup" target="_self" role="button" rel="noopener">
BUY NOW
</a>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Classroom-logo-2.png" alt="Sketch Classroom logo (2)" itemprop="image" height="58" width="250" title="Sketch Classroom logo (2)" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Scketch-Classroom.png" alt="Scketch Classroom" itemprop="image" height="300" width="500" title="Scketch Classroom" onerror="this.style.display='none'" />
<h2>
Starting at <b>$1,999</b>
</h2>
<a href="https://store.makerbot.com/3d-printers/sketch/sketch-classroom" target="_self" role="button" rel="noopener">
BUY NOW
</a>
<h5>
DOUBLE YOUR PRINTING CAPACITY
</h5>
<h4>
Avoid getting stuck in the 3D printing bottleneck and print more in half the time.
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Group-14010.png" alt="Group 14010" itemprop="image" height="14" width="105" title="Group 14010" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Standard.png" alt="Sketch Standard" itemprop="image" height="300" width="500" title="Sketch Standard" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Group-14030.png" alt="Group 14030" itemprop="image" height="57" width="250" title="Group 14030" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Sketch-Large-classroom.png" alt="Sketch Large classroom" itemprop="image" height="300" width="500" title="Sketch Large classroom" onerror="this.style.display='none'" />
<h5>
3D Printer Training & Design Thinking Courses
</h5>
<h4>
ISTE-certified 3D printer training and design thinking curriculum for both teachers and students
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Single-certification.png" alt="Single certification" itemprop="image" height="491" width="299" title="Single certification" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Classroom-certification.png" alt="Classroom certification" itemprop="image" height="531" width="357" title="Classroom certification" onerror="this.style.display='none'" />
<h5>
Enough Printing for a Whole Semester
</h5>
<h4>
Get your time back in the classroom and print across multiple printers simultaneously
</h4>
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Single-Accesories.png" alt="Single Accesories" itemprop="image" height="300" width="500" title="Single Accesories" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Classroom-accesories.png" alt="Classroom accesories" itemprop="image" height="300" width="500" title="Classroom accesories" onerror="this.style.display='none'" />
<h2>
From One Classroom to a Whole District
</h2>
<h4>
Tap into a scalable platform that can fit the 3D printing needs of teachers across one classroom or a whole school district.
</h4>
[geoip-content country="US"]
<li><a href="#" itemprop="url">CONTACT SALES<!– Long Form 4980 –>
<script src=”//pages.makerbot.com/js/forms2/js/forms2.min.js”></script>
<style>
h1 {text-align: center;}
</style>
<h1> Request a quote</h1><br>
<p> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more.
</p><br>
<form id=”mktoForm_4980″></form>
<script>MktoForms2.loadForm(“//pages.makerbot.com”, “444-ZTM-866”, 4980, function (form) {
// assigns values to hidden fields
jQuery(‘input[name=referrer_URL]’).val(window.location.href);
});
// remove form styles
MktoForms2.whenReady(function (form) {
jQuery(‘#mktoForms2BaseStyle’).remove();
jQuery(‘#mktoForms2ThemeStyle’).remove();
});
</script>
</a></li>
[/geoip-content]
<img src="https://www.makerbot.com/wp-content/uploads/2022/10/Frame-602.png" alt="Frame 602" itemprop="image" height="570" width="1208" title="Frame 602" onerror="this.style.display='none'" />
<img src="https://www.makerbot.com/wp-content/uploads/2018/06/lc_close.png" alt="close" />
<h3>THANK YOU FOR REQUESTING A QUOTE!</h3>
<p>A MakerBot Sales Representative will contact you within 24 business hours to discuss<br />which MakerBot products would best serve your needs.</p>
<p>Thanks for your interest, MakerBot Team</p>
<h3 id="mrkto-form-title">Request a Quote</h3>
<!-- Long Form 4151 -->
<form id="mktoForm_4151"></form>
<!-- /wp:fl-builder/layout -->
- Software
- Industries
- Resources
- Support
- Store
- 3D Printers
- Materials
- Extruders
- Accesories
- Contact us
- Request a Quote<!-- Long Form 3920 --> <script src="//pages.makerbot.com/js/forms2/js/forms2.min.js"></script> <style> h1 {text-align: center;} </style> <h1> Request a Quote todayTEST2</h1><br> <p style="color:black;"> Want to learn more about our business or education packages and receive a custom quote? Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more. </p><br> <form id="mktoForm_3920"></form> <script>MktoForms2.loadForm("//pages.makerbot.com", "444-ZTM-866", 3920, function (form) { // assigns values to hidden fields jQuery('input[name=referrer_URL]').val(window.location.href); }); // remove form styles MktoForms2.whenReady(function (form) { jQuery('#mktoForms2BaseStyle').remove(); jQuery('#mktoForms2ThemeStyle').remove(); }); </script>
- Login
