Tough is a material that is great for mid-stage prototypes because of its ease of use and office-friendliness. An added benefit over PLA is its durability, pliability, and machinability which makes it perfect for snap fits and assemblies.
- MakerBot PVA
- Breakaway Supports
- Finished part dimensional accuracy of ± 0.2mm (± 0.007in)1
|Heat Deflection (ASTM 648, 66 psi)||125-120°F||52-49°C|
|Flexural Modulus (ASTM D790, 15 mm/min)||377,000 psi||2,600 MPa|
|Tensile Strength at yield (ASTM D638, 50 mm/min)||5,080 psi||35 MPa|
|Tensile Modulus (ASTM D638, 50 mm/min)||406,000 psi||2,800 MPa|
|Strain at Yield - Elongation (%)||>52.7%||>52.7%|
|Notched Impact Strength (ASTM D256)||4.12 ft-lb/in||220 J/m|
MakerBot Tough filament was developed not only for its strength and part performance but also to overcome two of the most glaring issues that hamper ABS: warping and curling.
At 2X the impact strength of ABS, MakerBot® Tough™ filament offers superior durability for industrial prototyping and manufacturing aid applications. With tensile and flexural strength that match ABS, designers and engineers can create parts that hold up under all types of stress.
How can we help you?