Live Chat
What can we help you with today?
I want to chat with Sales.
Contact
I have a question about an existing order.
Contact
I have a technical question about my device.
Continue
Existing Orders
For faster service, enter your order number
(found in your confirmation e-mail)
Skip
Submit

Developed from the ground up leveraging industry-leading Stratasys® technologies.

BUILT TOUGH

Ultra-Rigid Metal Frame Construction

A structurally-optimized metal frame runs the full length of the body to offset flexing. Less flexing means more consistent prints with better part accuracy and fewer failures.

Front View

Side View

Top View

UNCOMPROMISED LAYER ADHESION AND PART STRENGTH

Circulating Heated Chamber

Control the temperature and quality of every layer - not just the first. While heated build plates are effective at reducing warping, Method takes this further with full active heat immersion during the entire duration of the print.

UNCOMPROMISED LAYER ADHESION AND PART STRENGTH

Circulating Heated Chamber

Control the temperature and quality of every layer - not just the first. While heated build plates are effective at reducing warping, Method takes this further with full active heat immersion during the entire duration of the print.

SPEED AND DIMENSIONAL ACCURACY
Dual Performance Extruders

The Dual Performance Extruder system is built from the ground up to accelerate print times and provide dimensional accuracy across every part.

Swipe to see the next feature

The Dual Performance Extruder system is built from the ground up to accelerate print times and provide dimensional accuracy across every part.

Smart sensors for material management and print protection

Leveraging industrial DNA, each Performance Extruder contains a suite of sensors that detect when material is running low and allows for active jam detection during the entire print duration. It's like autonomous protection for your print—and your printer.

Greater torque with a 19:1 dual-drive gear ratio

From great strength comes great performance. The 19:1 dual-drive gear ratio keeps material loaded and ready for reliable material extrusion at every layer.

Lengthened thermal core with less than 60-second heat up time

A lengthened thermal core and a fast start up time ensure that materials are ready to go when your ideas are.

Smart sensors for material management and print protection

Leveraging industrial DNA, each Performance Extruder contains a suite of sensors that detect when material is running low and allows for active jam detection during the entire print duration. It's like autonomous protection for your print—and your printer.

Greater torque with a 19:1 dual-drive gear ratio

From great strength comes great performance. The 19:1 dual-drive gear ratio keeps material loaded and ready for reliable material extrusion at every layer.

Lengthened thermal core with less than 60-second heat up time

A lengthened thermal core and a fast start up time ensure that materials are ready to go when your ideas are.

Optimized Material Storage

Dry-Sealed Material Bays

Dry-Sealed Material Bays form a near-perfect seal to keep material free of damaging humidity. A suite of built-in sensors provides that your material is stored in its optimal environment—a feature previously only available in industrial 3D printers.

Dry-sealed-material-bays
PUSH THE LIMITS OF WHAT'S POSSIBLE

MakerBot Materials for Method

 

PRECISION MATERIALS

Extensively tested by MakerBot for the highest reliability and measurably accurate parts.

SPECIALTY MATERIALS

For users looking for special materials with advanced properties to push the limits of what's possible.

 

Featuring MakerBot Tough: Print high-strength, durable prototypes with up to 2X the impact strength of ABS.

Unrestricted Geometric Freedom

Disolvable Support System

Superior surface finish and unrestricted geometric freedom are paramount to delivering high quality printed parts. MakerBot Water-Soluble PVA ensures fast and effortless support removal without compromising part design or dimensional accuracy.

MakerBot Water-Soluble PVA provides two key benefits:
- Unrestricted geometric freedom (large overhangs, cavities, etc.)
- Superior print quality and surface finish

GEAR & SHAFT
Download .STL

Size 13.7 cm x 13.3 cm x 13.3 cm

Print Time 16h 32m

MODEL
EXTRUDER

Material TOUGH

SUPPORT
EXTRUDER

Material PVA

INDUSTRIAL DNA. DESKTOP ACCESSIBILITY.

FEATURE OVERVIEW

TOUCHSCREEN CONTROLS
Swipe, tap, print. With the built-in 5" full-color capacitive touchscreen display, receive up-to-the-second status of your current print job and navigate menus in the most intuitive way you already know—with your finger.
Next Feature
SENSORS + CONNECTIVITY
A network of intelligent sensors embedded throughout the printer gives you full control while making material and print management easy and accessible.
Next Feature
SPRING STEEL BUILD PLATE
A precision-calibrated print base and spring steel build plate provide true flatness for unyielding part accuracy.
Next Feature
SMART SPOOLS AND THE SMART ASSIST MATERIAL LOADER
Insert the tip of your material, and the printer does the rest. With Smart Spools, monitor material details including color and quantity remaining directly within MakerBot Print.
TOUCHSCREEN CONTROLS
SENSORS + CONNECTIVITY
SPRING STEEL BUILD PLATE
SMART SPOOLS AND THE SMART ASSIST MATERIAL LOADER
Swipe, tap, print. With the built-in 5" full-color capacitive touchscreen display, recieve up-to the-second status of your current print job and navigate menus in the most intuitive way you already know-with your finger.
Swipe, tap, print. With the built-in 5" full-color capacitive touchscreen display, recieve up-to the-second status of your current print job and navigate menus in the most intuitive way you already know-with your finger.
A precision-calibrated print base and steel print plate provide true flatness for unyielding part accuracy-every time.
Insert your material and the printer does the rest. With Smart Spools, monitor material details including color and quantity remanining from directly within MakerBot Print.

Innovation. Unlocked.

Pre-order Method Today and Save!
Shipping beginning Q1 2019.
Individual ship date depending on order date and availability.

MakerBot-Method-3D-Printer-2

MakerBot Method

Be among the first to receive a Method 3D Printer and save $400*.

Everything you need to get started with rapid prototyping including MakerBot Precision Material, the MakerBot Accessory Tool Kit, and our MakerCare Gold Protection service plan.

*For a limited-time only, starting at $6,499 ($6,099 for pre-orders). Shipping beginning Q1 2019.

MakerBot Method for Business

MakerBot Method for Business is tailored to the needs of fast-paced and demanding organizations looking to eliminate the cost of downtime and prevent missed deadlines. Designed to keep your teams moving seamlessly and without interruption, only MakerBot Method for Business includes our most advanced extended warranty package — MakerCare Platinum Protection.

offering-method-for-business-2

Looking for our education offerings? Contact a MakerBot education specialist.

Maximum innovation.
Minimal investment.

MakerBot Method Cost Calculator

Uncompromised performance.
From the inside out.

1 Part Size: 13.7 x 15.2 x 10.2 cm | based on 52 parts per year average | prices shown in USD
2 Cost of material plus the cost per print of the printers depreciated over a period of 3 years

close

Request a Quote