ABS is one of the most popular materials for injection molded consumer products due to its clean surface finish, durability, and heat resistance. METHOD X can print manufacturing-grade ABS without warping and without weakening additives thanks to its 100°C heated chamber.
With our proprietary RapidRinse™ support achieve incomparable ABS parts with unprecedented ease.
Forget the cumbersome wash tanks and chemicals, RapidRinse™ dissolves in pure tap water so it’s easy to use in just about any environment.
You don’t have time to wait around while your print dissolves, so we’ve engineered RapidRinse™ to dissolve faster than PVA and competitive high-temp dissolvable support materials.
*Dissolution time may vary based on part geometry and dissolution methodology
- MakerBot RapidRinse
- Finished part dimensional accuracy of ± 0.2mm (± 0.007in)1
|Heat Deflection (ASTM 648, 66 psi)||183°F||84°C|
|Flexural Modulus (ASTM D790, 15 mm/min)||11,200 psi||77 MPa|
|Tensile Strength at yield (Type 1, 0.125", 0.2"/min)||6,236 psi||43 MPa|
|Tensile Modulus (ASTM D638, 50 mm/min)||348,000 psi||2,400 MPa|
|Strain at Yield - Elongation (%)||>2.6%||>2.6%|
|Notched Impact Strength (ASTM D256)||0.48 ft-lb/in||26 J/m|
Get dimensionally-accurate, production-grade, real ABS end-use parts at a fraction of traditional manufacturing costs. METHOD reduces costs and saves time for small production manufacturing runs.
Prototype with production-grade ABS to achieve part properties close to injection molded parts. Print dimensionally accurate assemblies and validate your designs to get your products to market faster—all at a fraction of industrial 3D printing costs.
Create durable, real ABS parts for the production floor. Print dimensionally accurate jigs, fixtures, and end-effectors that fit seamlessly with existing components.