MakerBot something for the mothers in your life! (or at least send them this video).

Today is the day when the residents of 78 countries engage in one big gasp: “Mother’s Day is two days away!” I bet you could hear this from space.

Here’s how a Maker solves this. Go to Thingiverse.

There are a number of things to download and make that your mom would love. Flowers, sculptures, jewelry, things to hold jewelry, phone accessories, organizers, aquarium structures, things for the home.

Did you take a nice trip with your mom? Thingiverse probably has a miniature of one of the buildings or monuments you saw. Or maybe you just want to customize a picture frame for that shot of the kids.

If you have a MakerBot, you can make your mom anything you can think of. Here are a few ideas to get you going. Whatever you make, be sure to tag it Mother’s Day to help fellow citizens of the Thingiverse.

Printable Letter Scale by Maakit

A store-bought postage scale might set you back anywhere between $10-$20.  This amazing design from Maakit creates a working letter/postage scale you can build yourself and use with a minimal amount of calibration.  If you’re not sure if you need one of these – you might want to check with that special knitter in your life.  Besides using our postage scale for determining correct postage, my wife uses a postage scale all the time to weigh yarn when she’s designing knitting patterns – so she can give people a sense of how much yarn is needed for a particular design.

It may actually surprise you how many special mothers in your life might appreciate this exact gift.  You’ll have fun building it for her and she’ll love using it. ¹  (You really should call her more, you know?)

Untitled by maakit

This thing brought to you by

Untitled by hotkey

This thing brought to you by

1. Maybe you could even personalize it with an embossed message? [↩]

On Teacher Appreciation week, I’m remembering my elementary school teacher Ms. Harrelson, who said nothing has to be perfect; just give it a shot and see what happens.

Unfortunately for Ms. Harrelson, I made something on Monday and it’s basically perfect. This was really exciting because it was one of the first things I made with my new Replicator, I barely changed the default settings, and it printed flawlessly the first time. Behold, my apple.

Apple by jbakutis

This started with the purely awesome Original Apple logo in 3D by acen. I wanted to photograph some of our people here offering an apple to a teacher they really liked. But acen’s has a bite taken out of it. First I discussed with the design guys how we could change this into a dualstrusion model, with a red peel, and natural colored fruit on the inside. Jason suggested another route: why not split acen’s model in half and mirror it to get a whole apple?

Bing, bang, boom.

I made this on a Replicator at 0.27mm layer height, feed rate of 55, 5% infill. I wanted something that would look good from a distance in a picture, but I’m telling you this thing looks beautiful. No cracking, no irregularities, and honest to goodness practically no effort. In Replicator G, under Scale, I clicked on “Fill Build Space!” – or in other words, I Keith-ed it¹ . This made the model 6” tall, so I scaled down by 0.7 to get an apple that’s just over 4 inches tall. For this, we made the leaf a separate piece, so this isn’t a dualstrusion file.

Sminnee asked on Thingiverse if I used any support material, but the answer is no. I might add another shell if I make it again; I just used one this time. I wonder if the very top, right where the leaf piece fits snugly into the apple itself, would have looked smoother with a little more structure in that area. One of our modelers, Jason, thought the model should have a hole all the way through the center of it. This gives the stem area, which dips down, a little beam of internal support.

But on account of the hole all the way through, this is also now a possible jewelry piece.

There are several fruit pieces, fruit bowls, and other accessories on Thingiverse (listed below). So here’s one more for your collection, or perhaps you think your mom would want a fruit bowl on Sunday. Enjoy!

Untitled by madebydan

This thing brought to you by

Untitled by diegoego

This thing brought to you by

Untitled by Prattotyper

This thing brought to you by

Untitled by mraiser

This thing brought to you by

Untitled by cawalke3

This thing brought to you by

Untitled by AbFabFab

This thing brought to you by

Untitled by Viztu

This thing brought to you by

1. not surprisingly, I did this at Keith’s suggestion. [↩]

Mother’s Day: Say It With Flowers

Mother’s Day is fast approaching and MakerBot wants you to say it with flowers — 3D printed flowers!

Mother Nature has decorated our planet with an endless variety of flowers, trees, ferns, and vines. Let’s model some original, printable flowers for the awesome Mamas in our lives– maybe even some that can sing, dance, or squirt water in her face — and share them on Thingiverse.com!

We’ve asked our own Mothers to *pick* their favorites, so c’mon, MakerBotters! Let’s make ‘em proud.  Read the rest of this entry »