Author Archive

Discover Support Material and Dual Extrusion

Posted by on Thursday, May 2, 2013 in Uncategorized

There’s lots to learn if you’ve just joined us in the world of 3D printing. Whether you’re learning the ropes with a new MakerBot Replicator 2 or if you’re still trying to wrap your head around what a MakerBot desktop 3D printer can do, the MakerBot Discover page is worth exploring. The Explore section of the MakerBot site is where you’ll find inspirational videos about some of our most amazing users and resources for learning more about 3D printing.

I just put two new videos up there today that are chock-full of useful information.

The Discover: Support Material video will tell you just how shallow of an overhang a MakerBot Replicator 2 Desktop 3D printer can handle and offers some tips for how to deal with different overhangs.

The Discover: Dual Extrusion 3D Modeling video will explain just what a dual extrusion is and demystifies the concept of creating a dual extrusion 3D model.

If you have any suggestions about videos or resources that you’d like to see on the Discover pages you can email us at [email protected]

Tagged with One comment

Visit us at SXSW!

Posted by on Sunday, March 10, 2013 in Uncategorized

_MG_0253We started off Austin’s SXSW Interactive in a big way on Friday with Bre’s opening remarks, revealing to the world an early prototype of the newest addition to our 3D ecosystem, the MakerBot Digitizer Desktop 3D Scanner. Since then we’ve continued to bring the MakerBot magic to the SXSW community at a number of locations throughout the city. If you’re here enjoying the Austin madness be sure to come by and see us at one of these spots. We’ll be here Sunday March 10th and Monday March 11th.


SXSW Create presented by Autodesk
101 Red River St. Austin, TX 78701 (right next to the Austin Convention Center)
Open 11:00am-6:00pm through Monday March 11th
Free and open to the public!


#FEED powered by Twitter
700 Congress Ave. Austin, TX 78701
Open 10:00am-6:00pm each day of the conference
SXSW badge required!


The Turner Lounge
303 Red River St. Austin, TX 78701
11:00am-6:00pm through Monday March 12th

Tonight we’ll be enjoying a 3D printing meetup with our friends from Shapeways. Be sure to stop by at Craft Pride (61 Rainey St. Austin, TX) between 6:00pm-7:00pm on Sunday March 10th to have some fun. Use this link to RSVP.

Tagged with Leave a comment

MakerBot Replicator 2X Video Tutorials

Posted by on Thursday, February 28, 2013 in Uncategorized

As you may have heard, Monday marked the first day of shipments for the MakerBot Replicator 2X Experimental 3D Printer. Whether you’ve just received your machine or are patiently awaiting it’s arrival, these videos will help prepare you for the journey you are about to embark on. In addition to the videos, the documentation pages in the Support section of our website and the downloadable User Manual are available now to help make sure you set out on the right foot.

Unboxing: The MakerBot Replicator 2X takes just a few minutes to set up. This video will show you how to carefully unpack and setup your new machine.

Startup Process: Before you start making things you’ll need to level the build platform and load the MakerBot ABS filament into your MakerBot Replicator 2X Experimental 3D Printer. Your MakerBot Replicator 2X will walk you through this process step-by-step by displaying directions on it’s LCD panel. Watch this video and follow along with the directions so that your MakerBot Replicator 2X can make its very first thing!

MakerWare Dual Extrusion: MakerBot MakerWare 2.0 was just released yesterday. One of the most exciting things about this update to our software is that it now supports dual extrusion. If you need an intro to preparing a model for dual extrusion on your MakerBot Replicator 2X, this is the video to watch. If you’re new to MakerBot MakerWare and need a basic tutorial then be sure to start here.

Maintenance Routine: Your MakerBot Replicator 2X Experimental 3D Printer requires some simple upkeep. Replacing your kapton tape and greasing the z-axis rod and the x-axis idler pulley will help keep your new machine purring.

If you’ve got a MakerBot Replicator 2 Desktop 3D Printer you can find your getting started videos here.

Tagged with , , One comment

Discover Quick Tip Videos!

Posted by on Monday, February 18, 2013 in Uncategorized

Three new videos have been added to the Explore section of our site! Explore is a hub for MakerBot content. You can visit that section at any time to learn things about our products and get inspired by other users! These three videos include quick tips for people who own MakerBots (and if you don’t have a MakerBot yet you’ll probably still find them interesting).

Watch The First Layer explains why it’s important to pay close attention to the first layer of your 3D print as it’s being put down. You’ll find out how to read that layer and make adjustments when necessary so that the rest of your print goes smoothly.

Print Pausing shows you how to pause during a 3D print and explains why you might want to use this feature. Game changing info: you can use the pause feature to get multi-colored 3D prints using a MakerBot Replicator 2 Desktop 3D Printer!

Updating Firmware tells you how to upload new versions of MakerBot MakerWare and new machine firmware for your MakerBot Replicator 2. You’ll be shocked by the visible improvement that uploading new firmware could make on the quality of your 3D prints!

Tagged with , , , , , , , , , , 4 comments

Manufacturing and Prototyping on Your MakerBot Replicator 2

Posted by on Wednesday, January 16, 2013 in Uncategorized

Find out how these two MakerBot users are forging forward into the next industrial revolution!

Chris Milnes had never 3D printed anything when he invented an iPhone accessory he desperately needed. While the Square credit card reader makes his life easier as a business owner, it tends to spin and twist during use. His simple design, the Square Helper, connects the Square unit to an iPhone or iPad and prevents it from twisting, saving the merchant time and hassle. With his MakerBot Replicator 2 Desktop 3D Printer, Chris has a factory on his desk for making high-resolution, durable units. Even better, the Square Helper accessory is selling for a big profit, without any need for injection molding. Chris’s story is a great example of how a MakerBot can empower anyone with an idea to become an inventor, a manufacturer, and an entrepreneur.

Marcel Botha says the need for a better baby spoon is obvious: just look at any baby’s face after his most recent meal. Unfortunately what makes for some pretty hilarious shots on Instagram can be a real pain for the parent on the other end of the spoon. Marcel partnered with a few others including Manuel Toscano of the New York based creative agency Zago to create Spuni, a revolutionary spoon suited for a baby’s mouth. Now the team uses their MakerBot Replicator 2 Desktop 3D Printer to create samples for press and potential investors. Having a MakerBot in the office gives the Spuni team the (relatively) immediate gratification of having proof-of-concepts in hand within a few hours instead of a few weeks.

Make sure to check out the Explore section of our website where Square Helper and Spuni are currently featured. The Explore pages will give you a chance to get inspired by hearing from other MakerBot Explorers and to Discover the MakerBot ecosystem. We update it frequently so make it a regular stop on your MakerBot tour.

Tagged with , , , , 2 comments

MakerBot Replicator 2 Video Tutorials

Posted by on Thursday, October 4, 2012 in Uncategorized

Eagerly awaiting the arrival of a brand new MakerBot Replicator 2 Desktop 3D Printer?

Well, here’s a little treat to tide you over!

We’ve made four video tutorials that will walk you through everything you’ll need to know about setting up, operating and maintaining your Replicator 2. Setup for the MakerBot Replicator 2 is incredibly easy (even easier than it was for the original Replicator, if you can believe it!) and we’ve worked really hard to get you thorough documentation and instructions (including a top-notch user manual!) so that you’ll always have a hand to hold as you make your way into the wonderful world of owning a MakerBot.

ONE: Unboxing
The MakerBot Replicator 2 comes assembled and it takes just a few minutes to get it started up. In the Unboxing video I’ll show you how to carefully unpack and setup your Replicator 2.

TWO: Startup Process
Once you’ve unboxed your MakerBot Replicator 2 you’ll be ready to run through the startup process. In the Startup Process video I’ll show you how to level your build platform and load your MakerBot PLA filament so that your Replicator 2 can make its very first thing!

THREE: MakerBot MakerWare
MakerWare is a brand new software developed here at MakerBot that prepares models for being made on a MakerBot Replicator 2. In the MakerBot MakerWare video I’ll show you how to load a file into the software, move it, scale it, and make it!

FOUR: Maintenance Routine
The MakerBot Replicator 2 is an easy to use machine that requires a simple occasional maintenance routine. In the Maintenance Routine video I’ll show you how to lubricate the threaded rod and clean out the drive gear on your Replicator 2.

Tagged with , , , , , , , , 17 comments

What Mixtape Will You Make?

We just brought the MakerBot Mixtape to a whole new level by releasing the negative file for the Mixtape audio component on Thingiverse! This means that with some skillful boolean operations in a 3D modeling program you’ll be able to make anything on Thingiverse into a Mixtape. If that’s not awesome then I don’t know what is.

We also put together a nice little video that features the creators of the Mixtape – John Briscella and Matt Kroner – to tell you a bit about how it works and how to assemble one. The MakerBot Mixtape was a collaboration that we did with Playbutton. Make sure you read the special little interview that The Creators Project, a wonderful forum for technology and art founded by Vice and Intel, did with our boys this week too.

And if you haven’t seen the video that we did to launch the Mixtape make sure you watch that as well. It’s kind of the most adorable thing ever.

Briscella has already put up a couple of new Mixtape ideas like the Beethoven Mixtape and the Heart Mixtape. I’ve been rocking the hell out of a stellar pink heart mixtape with acid blue buttons and it blows minds left and right.

And now what I want to know is – what Mixtape will YOU make!

Error - could not find Thing 27768.

Error - could not find Thing 27770.

Error - could not find Thing 28184.

Tagged with , , , , , , 3 comments

MakerBot at the Robot Film Festival

Posted by on Friday, July 13, 2012 in Uncategorized

As if San Diego Comic-Con and HOPE Number 9 weren’t enough events to be at in one weekend, MakerBot will also have a presence at the Robot Film Festival this Saturday July 14th at Three Legged Dog theater in lower Manhattan!

The doors to the 2nd Annual Robot Film Festival open at 10:30am and the day begins with a screening of ROBOT & FRANK, starring Frank Langella, Susan Sarandon and Liv Tyler. R.Maker, the MakerBot mascot, will be making a big-screen debut during the short film section of the festival which begins at 2:30pm. And MakerBot’s very own Joshua Friedman, who creates the R.Maker Adventures, will be there to introduce R.Maker to the masses and to show folks how he uses a Replicator to create things for his stop-motion sets.

The evening will wrap up with the Botskers, an official awards ceremony hosted by Reggie Watts, Heather Knight, Josh Ventura and Data the Robot, honoring the winners from throughout the day. And the adorable Botsker trophies were printed here at MakerBot HQ!

Tickets are available here. Don’t miss this opportunity to see a Replicator in action, to see R.Maker on the big screen, to meet our all-star animator and to get your year’s fill of ROBOT FILMS!


Tagged with Leave a comment

Happy Father’s Day!

Posted by on Friday, June 15, 2012 in Uncategorized

Send this video to the fathers in your life this weekend! 
And check out what else you can do with a MakerBot on Father’s Day!

Tagged with , , , , , Leave a comment

MakerBot A SkatePark!

Posted by on Monday, June 11, 2012 in Uncategorized

Okay guys – it’s time to get real. This video that you’re about to watch is most assuredly the coolest video I’ve ever made. Seriously. It’s really freaking awesome.

This project was a collaboration (all awesome projects are, aren’t they?) between myself and my associate producer Josh Friedman and a handful of the greatest fingerboarders on the planet – Mike Schneider, Taylor Rosenbauer, Doug Bodkin and Tim Hurley. Josh, who animates the wonderful R.Maker Adventures and moonlights as a 3D designer, designed a bunch of skate ramps in Sketchup and put together the ultimate indoor skatepark which the boarders came in to shred on. And shred they did.

The best part of all this? Now you can MakerBot your own skatepark using the design files on Thingiverse. So make your own park, customize your own ramps, make your own sweet videos and keep on keepin it awesome!


Error - could not find Thing 24747.
Tagged with , , , , , 3 comments
What can we help you with today?
I want to chat with Sales.
I have a question about an existing order.
I have a technical question about my device.
Existing Orders
For faster service, enter your order number
(found in your confirmation e-mail)