It has been a passion of mine for a long time (about a week) to create “Raceway Targets” that can be run over for World Maker Faire 2011. Perhaps to gain points, perhaps to lose points, perhaps just to be ridiculous.
Thankfully, Andrew Plumb (aka Clothbot) built an OpenSCAD project for the brace and the hinged mount that I was requesting — and leveled up the whole concept.
So now it is time for you to create your own 2D designs and 3D silhouettes to be used to make Raceway Targets of your own. Please share your own targets by making derivatives of the Raceway Targets thing, and tag your item “raceway” so we’ll see to print them out.
Check out my Raceway Targets Set 01 (with the Chicken That Didn’t Cross the Room) and ecohen‘s Flat Yodsta / Gangda as a place to get started.
For all your Raceway Target practice needs!
Still refining the code, but it works!
DXF profiles created by Matt Griffin (mifga)!
Notes:
- Froggie:
- May need to set shells=0 to slice Froggie for the thin scarf and leg sections.
Changelog:
2011/09/16:
- Added Froggie (Cleaned) using thing:11578 source.
- Added SpookyCat and ChickenCrossesTheRoad.
It has been a passion of mine for a long time (about a week) to create "Raceway Targets" that can be run over for World Maker Faire 2011. Perhaps to gain points, perhaps to lose points, perhaps just to be ridiculous.
Thankfully, Andrew Plumb built an OpenScad project for the brace and the hinged mounting point that makes these possible.
So now it is time for you to create your own 2D designs to be used to make Raceway Targets of your own! Please share your own images or sets! Or your flat items that you would like attached to a hinge and run over!
A flat version of yzorg's Yodsta derivative. Attach it to a Raceway Target and your Turtle Shell Racer will fight for the Sith.
