Comments on: Motherboard Firmware v2.2

By: Spare parts | MakerBlock

Spare parts | MakerBlock — Tue, 06 Jul 2010 23:10:52 +0000

[...] things on my MakerBot is concerned. I’ve designed, created derivatives, printed upgrades, updated the firmware, installed the latest (super sweet!) RepG, and even performed some [...]

By: VegasVader

VegasVader — Thu, 01 Jul 2010 20:32:02 +0000

Had no problems installing Motherboard update, but system absolutely refuses to install extruder update. Tried everything, reset switch, cable to extruder, cable to motherboard, power to motherboard, no power to motherboard
rest before update, reset at different times before and after hitting update, etc, etc, etc. No combination has been left out. tried this like 20 times, and no luck.

Bad Extruder board?

Lost in Las Vegas…

By: mctrivia

mctrivia — Thu, 24 Jun 2010 22:15:50 +0000

upgraded. now to check if the bug still exists that if you have a file named xy01.s3g and xy02.s3g and print xy01.s3g xy02.s3g gets deleted.

By: Bernhard Slawik

Bernhard Slawik — Thu, 24 Jun 2010 10:31:04 +0000

Awesome! I got the best results ever!

By: Dave Durant

Dave Durant — Wed, 23 Jun 2010 23:51:39 +0000

After aborting a print, I still get a bit of what the left graph looks like.

Also, unrelated repg 0017 bug, if you open an STL file then open a GCODE file, only the Build To File button is enabled.

By: Torleif

Torleif — Wed, 23 Jun 2010 22:51:57 +0000

double what dave said

By: Dave Durant

Dave Durant — Wed, 23 Jun 2010 22:44:22 +0000

Awesome, Adam!

I still get an occasional stall where X/Y stops moving for 10 seconds or so but the extruder stays on. Then it wakes up and keeps going but I’m left with a big blob, which is rarely useful. Will this likely also help with that sort of problem?

By: Ben Rockhold

Ben Rockhold — Wed, 23 Jun 2010 22:37:38 +0000

YESSSSSSSSSSSSSSS.
This is the issue I have had.
Now show me where the source is so I can make it work with my messed up board.