MakerBot Industries

These past two weeks, I’ve been honored to run an intensive MakerBot workshop in lovely Lisbon, Portugal. The goal was simple: build two MakerBots, and print print print print print. We achieved goal #1 over the course of two evenings. Grand total of about 8 hours for 10 people to build 2 makerbots. It was really awesome.

Of course that left us with 12 days in which to design, print, and learn all there is to learn about how to do 3D printing on a MakerBot. Many wonderful things were designed, printed, and shared with the world. In no particular order, I’d like to present some of the interesting results of the workshop

Radiohead’s Thom York
This one was done by Tiago Serra and turned out great. He also managed to get reblogged on a bunch of other sites too. Click the image to view the model on Thingiverse.

Experience
This piece, entitled ‘Experience’ by Sónia Moreira was a great bit of art and very interesting to hold in your hands. I believe this was her first time using 3D modeling tools and was made using Wings3D and Blender. Click the image to view the model on Thingiverse.

Servo Suspension System
This design was very cool and very practical. Created by Guilherme Martins, it is a servo mount with integrated suspension system intended for use in a robot. Very cool! Click the image to view the model on Thingiverse.

PS3 Eye Support
Another really nice, really practical item was this custom support for a camera. It was designed by Sergio Ferreira for use in an art installation involving ants (also really cool!) Click the image to view the model on Thingiverse.

Pink Panther Woman
Last, but not least, we have this provocative model by Pedro Januário who is a very talented 3D modeler. He did many interesting models, but this was by far the most impressive. While printing this piece, he shattered many records, most notably the Longest Print, clocking in at 4+ hours. Click the image to view the model on Thingiverse.

Of course there were many, many other things designed and printed during the course of the workshop, and these are just a sample of the cool stuff that was done. Congratulations to all the participants and keep on rocking the 3D world.

Last year I made a video every day of November. This year, it’s time to do it again. Every weekday, I’ll post a new video. I’m doing this with some other video superstars! It’s New In November! Today I’m showing you MakerBot Industries! Oh, and I’m trying to do every video in under 1 1/2 minutes. Speed!

One of our goals when we started MakerBot and designed the CupCake CNC was to automate one of the most tedious things of all time: frosting cupcakes. This incredibly difficult task has plagued mankind for centuries, but at long last we have found a reliable way to automate the process.

Our original design for a frosting extruder followed in the footsteps of Fab@Home’s paste extruder. They have a fairly elegant solution that uses linear actuators. Unfortunately, the linear actuators themselves cost more than our target price for the entire kit, so we attempted to come up with an emulated design that uses standard motors, lasercut gears, and some threaded rod to create a motorized plunger.

Well, this worked up until a point, but it was a pretty error prone and bulky solution. The gears were difficult to attach. The threaded rod based plunger required a design at least 2x the height of our desired syringe (60cc) and basically was heavy and didn’t work well. It was certainly an interesting design challenge for Bre, Will, and I that saw about 7-8 iterations and a failed appearance on TV, but ultimately it was fruitless. There’s a reason we never released the MK1 for sale.

Not only that, but the motorized piston based solution is an inherently flawed approach: The extrusion of a material is based primarily on the pressure, viscosity, and nozzle diameter. There’s not much you can do about viscosity and nozzle diameter, so we’re mucking with pressure. In the motorized piston approach, the pressure builds up gradually as you push the plunger down, and releases as the material either leaves the syringe or you back off the plunger. The result is that you either have extremely slow start/stop times or you have to deal with massive ooze problems.

Which brings us to the MK2. I was musing over the design failures one day when I had the idea that instead of trying to create the pressure in the syringe mechanically using a plunger, what if we directly applied pressure using air. I reasoned that we could use a commonly available air compressor and electrically controlled solenoid valves to push frosting out of a syringe tip. I had this idea for about 6 months, but it had to sit on the backburner for a while until I had a chance to work on it.

My first experiment was with some thick, chocolate frosting that you can find in nearly any grocery store. I simply wanted to see if it was possible to use air pressure to extrude frosting, so I wired up a solenoid to a switch and used that solenoid to turn the air pressure on and off to the syringe. I was using a 21GA (0.53mm) needle and a standard 60cc syringe. I hooked it up to the air pressure and opened the valve. Nothing happened right away, but I gradually turned the pressure up until about 50-60 PSI I started getting a frosting extrusion. I kept turning up the pressure to about 80 PSI where I got a really nice, very fast frosting extrusion that was about 0.5mm wide. Success!!!

Well, it wasn’t a total success: when I closed the valve, the syringe was still pressurized and continued to extrude. Obviously that is a problem, so I went back to the drawing board. I came up with the idea of adding a 2nd valve that would act as a relief valve and release the built-up pressure to the outside world. I grabbed a second valve and went back to the garage to experiment. The result was phenomenal! I was able to start and stop the extrusion at will, with zero oozing problems. This was excellent news. I soon had an Extruder controller wired up to the solenoids and a tester gcode script that would cycle the valves every 10 seconds. It was amazing to see a stream of frosting coming out and stopping every 10 seconds. I ran to get Bre and Adam to celebrate and we danced a frosting dance.

So: fast forward a few weeks and we’re gearing up for the Yahoo Hack Day in Times Square. We really didn’t have a solid game plan for what to do, but we knew we wanted to have fun and stay up all night hacking. I was really into the new frostruder design, so I brought it with us along with a portable air tank and a bike pump. We spent all night hacking on the frostruder and trying a variety of edible materials (frosting, peanut butter, and jelly). We ended up winning the Best Hardware Hack category with our New York Toast entry. It was a fun, fun hacking adventure.

For more info, check out Thingiverse and the MakerBot wiki.

MakerBot is going to be in the best art show of the 21st century. It’s called Bits ‘N Pieces and it’ll be at Material Connexion starting on Thursday.

DATES: November 4 – December 4, 2009
HOURS: Monday – Friday, 9am – 6pm
LOCATION: Material ConneXion 60 Madison Avenue, 2nd Floor New York, NY 10010 T. 212-842-2050
NEAREST SUBWAYS: #6 at 28th and Park / NRW at 28th and Broadway.

Bits ‘n Pieces is a traveling exhibition of work by international designers, architects, computer scientists, and material and technology researchers. It will showcase projects still in their development stage, as well as furniture, architecture, jewelry, graphic design and products that anticipate the next phase of the digital revolution, focusing on how society is imbued with, shaped by and shapes technology. This new era will be marked by increased awareness about, and accessibility of, continuously advancing technologies and materials and the changes that we will be making in our lives through them will be not just formal but structural, not merely aesthetic but substantive, changing how we actually think about, design and build our objects and space. What will life look like based on changes that are sometimes visible to the public and sometimes invisible?

Read on for the conceptual essay. (It’s good) Read the rest of this entry »

There is a 3D model at the bottom of the box. What a great idea! Hat Tip: Paul Beard

Spaghetti packaged as a 3D model of the Chrysler building – Core77.